Table of Contents
Advertisement
Quick Links
OLS-2000/OLS-2100 Occupancy Lighting Switch
The OLS-2000/OLS-2100 Occupancy Lighting
Switch is a passive infrared sensor that turns lights
on when occupancy is detected and off when the
area is empty. Three adjustments are available:
light level, time delay, and sensitivity level--
allowing for changes that best match the room's
use and the occupant's needs.
Lighting is a large part of a typical commercial
building's energy consumption, accounting for 40%
of the electricity used. Whether used as
standalone lighting control or as part of an existing
lighting system, the OLS-2000/OLS-2100 helps
reduce energy costs.
Standard, Single-toggle
Switch Size
Infrared Occupancy Sensor
Two Models Available:
120/277 or 347 VAC
(60 Hz Only)
Low-profile Design
° °
180
Field of View: Coverage
to 900 sq ft (81 sq m)
Adjustment Cover with
Anti-tampering Feature
© 1996 Johnson Controls, Inc.
Part No. 24-7691-25, Rev. B
Code No. LIT-216270
Features and Benefits
Allows quick and easy replacement of existing wall
switches, reducing installation time
Controls lighting usage based on occupancy
Provides compatibility with supply voltages in most
commercial buildings
Complements any building or office decor
Covers most typical offices, conference rooms, and
storage areas
Prevents unauthorized changes to selected settings
FANs 216, 1628.3
Product/Technical Bulletin OLS-2000/OLS-2100
Issue Date 0596
Figure 1: OLS-2000/OLS-2100
1
Advertisement
Table of Contents
Related Manuals for Johnson Controls OLS-2000
Summary of Contents for Johnson Controls OLS-2000
- Page 1 Lighting is a large part of a typical commercial building’s energy consumption, accounting for 40% of the electricity used. Whether used as standalone lighting control or as part of an existing lighting system, the OLS-2000/OLS-2100 helps reduce energy costs. Figure 1: OLS-2000/OLS-2100 Features and Benefits...
- Page 2 (1.1 to 1.4 m) above the floor, with an unobstructed view of the work or traffic area to be monitored. The 4. Wire the OLS-2000/OLS-2100 as shown in OLS-2000/OLS-2100 has a 180 degree field of view Figure 4. [900 sq ft (81 sq m)].
- Page 3 Place the wallplate over the sensor R ed LE D and attach with two screws. A wallplate is not included with the OLS-2000-3, 347 VAC model. Purchase a Lens decora-style wallplate (also used for ground fault detectors) separately.
- Page 4 The performance specifications are nominal and conform to acceptable industry standards. For application at conditions beyond these specifications, consult the local Johnson Controls office. Johnson Controls, Inc. shall not be liable for damages resulting from misapplication or misuse of its products.
Need help?
Do you have a question about the OLS-2000 and is the answer not in the manual?
Questions and answers