LORUS NREAQ Instruction Manual

NREAQ

■ HOW TO USE NON-CALENDAR MODEL

Pull the crown OUT to the FIRST click and set the
time. Then push the crown IN.
Note: When you set the time, first set the minute
hand to a properly advanced time, then
return the minute hand to the correct time
by turning it COUNTERCLOCKWISE.
Time setting for Cal. V516
Turn the hands counterclockwise to advance
them 4 to 5 minutes ahead of the desired time.
Then turn them clockwise to set them to the
exact time.
■ H O W T O U S E D AY / D AT E M O D E L
T h e d a y o f t h e w e e k c a n b e d i s p l a y e d
bilingually (English/another language) and you
can select either.

1. How to set the day and date

P u l l o u t t h e
crown to the first
click position.
(The crown of
this watch can
be pulled out to
the second click
position.)
Day setting for Cal. V828 (Ladies' Day/Date)
Turn the hands clockwise and counterclockwise
repeatedly between 11:15 pm and 3:45 am to
select the desired day and language.
Note: Do not attempt to set the day and date
between the times of 9:00 pm and 4:00 am
as this may cause the day and date
displays to change out of sequence.

2. How to set the time

P u l l o u t t h e
c r o w n t o t h e
s e c o n d c l i c k
position and the
s e c o n d h a n d
s t o p s . T h e
s e c o n d h a n d
s h o u l d b e
stopped on 12
o'clock position.
• Be sure to check that the AM/PM is correctly
set. (The day and date are designed to
change once every 24 hours.)
• To adjust the correct time for a quartz watch,
it is necessary to advance the minute hand
4 or 5 minutes ahead of the correct time and
then turn it counterclockwise to set the
designated time.
■ L U M I B R I T E WAT C H
✼ If your watch is a LORUS LUMIBRITE watch, it
has following features.
LORUS LUMIBRITE watches absorb and store light
energy from natural and artificial light sources
and emit light in the dark. They are made of
environmentally friendly material, and therefore,
a r e h a r m l e s s t o h u m a n b e i n g s a n d t h e
environment.
• With a full charge, LORUS LUMIBRITE watches
glow in the dark hours longer than conven-
tional luminous watches of this type. If ex-
posed to a light of more than 500 lux (i.e.,
the brightness of a typical office) for approxi-
mately 10 minutes, or direct sunlight for 2
minutes, they will glow for hours.
• Since LORUS LUMIBRITE watches emit the light
they store, the brightness will decrease
gradually over time. The length of time they
will glow may also differ slightly depending
on such factors as the brightness of and
distance from the light source used to charge
the watch.
Page 1
N o r m a l p o s i t i o n
F i r s t c l i c k
Turn the crown
a n d s e t t h e
p r e v i o u s d a y
and date. (The
day and date
can be selected
a l t e r n a t i v e l y
and displayed in
E n g l i s h o r t h e
other language.)
Turn the crown
a n d s e t t h e
desired time.
6-2005
P u l l o u t t h e
crown to the
second click
position and
set the present
day and date
by turning the
minute hand.
Push the crown
in to the normal
p o s i t i o n i n
a c c o r d a n c e
w i t h a t i m e
signal.
05.5.10, 10:45 AM
Adobe