Mvr-25X Local Panel Structure - Deif MVR-200 Series Operator's Manual

• 7 navigation buttons for IED local programming and a button for password activation.
• RJ-45 Ethernet port for IED configuration.
Power LED is lit (green) when the unit is powered on. The Error LED is lit (red) when relay has an internal error that affects the
operation of the unit. This can be either a hardware or software error. The Start LED (yellow) and Trip LED (red) activation is user
settable. The activation and color (green/yellow) of the 16 LEDs on the right side of the display are user settable.

2.1.2 MVR-25x local panel structure

An MVR-25x has multiple LEDs, control buttons, function buttons and local RJ-45 Ethernet port for configuration on front as a
default. On rear each unit is equipped with RS-485 serial interface and RJ-45 Ethernet interface options as a standard. See list
below.
Figure 2.2 Local panel structure
• 4 default LEDs for free configuration: Power, Error, Start and Trip.
• 16 freely configurable LEDs with programmable legend texts.
• 3 object control buttons: Choose the controllable object with Ctrl –button, control breaker with 0- and I push buttons.
• L/R push button for local remote control.
• 7 navigation buttons for IED local programming and a button for password activation.
• 12 freely configurable function buttons.
• RJ-45 Ethernet port for IED configuration.
OPERATOR'S MANUAL 4189341220A UK Page 7 of 51