Deif MVR-200 Series Operator's Manual page 32

Object statuses can be connected directly to physical outputs in Signal Connections menu which is sub-menu to APP CONTR
menu. It is possible to connect to output relay or to start- trip- or user configurable LED. Connection to outputs can be either latched
|x| or non-latched x.
Object blocking is done in Blocking Input Control menu. Blocking can be done by using digital inputs, logical inputs or outputs, stage
start- trip- or blocked information or by using object status information.
Figure 3.26 Object registers and events.
OPERATOR'S MANUAL 4189341220A UK Page 32 of 51