Table of Contents
Advertisement
Info-menu
Figure 3.14
Info menu indicates all the details listed below certain protection stage or function.
•
Function is activated and disabled in Stage activation menu. It is possible to disable function in Info menu as well.
•
Function condition indicates whether the stages condition is Normal, Start or Trip.
•
Measured amplitude can be Peak-to-peak, TRMS or RMS. As a default it is set as RMS. Available measured amplitudes vary.
•
Under Characteristic graphs-title you can open graphs related to the protection function.
•
Info view has calculator for function starts, trips and blockings. It is possible to clear calculators by choosing Clear statistics and
Clear.
•
Measurements are visible in Info menu.
•
Active setting group and its settings are all visible in Info menu. Other setting groups can be set in the Settings-menu.
OPERATOR'S MANUAL 4189341220A UK
Page 22 of 51
Advertisement
Table of Contents
