CAE SoundCam Series Product Manual page 38

The Settings Menu
Time constants
fast
Slow
impulse

Time settings:
Here you can set the date and time of the system.
These are needed to generate the file names of the measurements.
The file names are normally structured as follows:
YYYY-MM-DD_HH-MM-SS.tdms
To change the date and time, click on the fields (HH, MM, DD, MM or YYYY) and enter the
desired values. To apply the settings, click on the button with the tick (see Figure 45).
This function is only available on the SoundCam, but not under Windows.
(2) Data management / data export
Two selection windows are available:
On the left, the file listing of the SoundCam's
internal memory;
On the right, the listing of the files on your USB
stick or other medium.
1 .
Select the storage location for your files on
the external medium in the right-hand
selection window by double-clicking on the
desired directory.
2 .
Mark the files and directories you want to copy (1) or move (2) to the external medium. (1) or
move (2) in the left-hand selection window by tapping on them.
3 .
Press the button (1) or (2).
The transmission also works in the opposite direction, visible by the opposite orientation of the
buttons (1) and (2).
The button (4) is used to mark all files of a selection area. Pressing it again also adds the directories,
pressing it a third time removes the marking.
Tapping the button (3) deletes the selected files and directories.
Before removing the storage medium, exit the data export menu.
Manual SoundCam
SoundCam 1.0 SoundCam 2.0 &
SoundCam Ultra
21 ms 25 ms
168 ms 200 ms
21 ms (Increase ) 25 ms (Incrase)
168 ms (Waste) 200 ms (waste)
Figure 46: Data transmission




38