CAE SoundCam Series Product Manual page 20

Triggering recordings (self-timer)
Brief overview for the trigger method Spectrum.
Pre-trigger time
Post-trigger time
Time cursor
Maximum
Mean value
Minimum
Manual SoundCam
The period before the trigger point that is covered by the recording.
The period after the trigger point that is covered by the recording.
Adding the current coordinates (frequency / level) as marker point.
Removes a previously selected marker point.
Select the previous marker point.
Select the next marker point.
Delete all markers.
Show/hide the spectrum in which the time cursor is currently located.
Show / hide the maximum curve.
This curve is based on the last measurement.
Show / hide the mean value curve.
This curve is based on the last measurement.
Show / hide the minimum curve.
This curve is based on the last measurement.
20