IDEC WB1F Support Tool User Manual page 16

1 Overview
5
The reading results are displayed. "Requests (computer → WB1F)" are displayed as blue text. "Responses (WB1F →
computer)" are displayed as red text. When a barcode is successfully read, the reading results are returned as the re-
sponse. When reading fails, "?" is returned as the response. The following shows an example of reading a barcoded.
Example: ASCII display example
^get･ ↲
1234567890･ ↲
^get･ ↲
?･ ↲
･ ↲ : Represents the ASCII code control characters CR
as characters, they have been replaced with other characters. LF alone is displayed as " ↲ ", and the other
control characters are displayed as "･". Check the control characters by switching to the HEX display mode.
2 Operational Check
Click Start reading
Barcode reading results "1234567890" (reading successful)
Click Start reading
Barcode reading results "?" (reading failure)
2-7
3 Screen and Menu
LF . Since the control characters cannot be displayed
4 Appendix
Operation confirmation method