Setup; Installing The Support Tool; Uninstalling The Support Tool - IDEC WB1F Support Tool User Manual

1 Overview
2. 2

Setup

2. 2. 1

Installing the support tool

To use the support tool, it must be installed on a computer. Do so with the following procedure.
Unzip the compressed "wb1f_support_tool_100.zip" file to the desktop or any desired location.
After you unzip the file, double-click "wb1f_support_tool.exe" in the "wb1f_support_tool_100" folder to run the support
tool. The support tool may not run correctly if the files in the folder are deleted or moved.
2. 2. 2

Uninstalling the support tool

When you no longer need the support tool, it must be uninstalled from the computer. Do so with the following proce-
dure.
Delete the entire folder (including the files) that was created by unzipping the compressed "wb1f_support_tool_100.zip"
file. The support tool does not use the registry, so you will not need to delete any registry entries.
The number "100" in the "wb1f_support_tool_100" file name will vary depending on the version of the tool be-
ing used.
2 Operational Check
2-2
3 Screen and Menu 4 Appendix
Setup