Commissioning Of The Fixed Setpoint Controller Sm Wr Fr - WITA SM WR FR Series Installation Manual

Operating instrutions
WITA Fixed setpoint controller SM WR FR
8 Commissioning of the fixed setpoint
controller SM WR FR
When the fixed setpoint controller is first connected to the network, the type of
the controller, the program version and the LOGO are shown on the display.
The display then switches to the basic display.
The basic display is shows the factory setting during the first commissioning,
then the last set values and settings.
In order to make new settings in the fixed setpoint controller, Basic display
the manual adjustment knob must be disassembled so that
the setting buttons are accessible. By simultaneously
pushing the button 5s,
the display switches to selection mode, where an adjustment
can be made to the existing system. (See process)
selection selection selection valve min. temperature max. temperature setting tempe-
heating / cooling hydraulic scheme direction of rotation heating heating rature heating
Cooling
flow control
selection valve
direction of
rotation
Basic display
Mit Confirmation of the display will save the settings.
39