Selecting And Setting The Target Temperature; Selecting And Setting The Mixer (Valve) Direction Of Rotation; Selecting The Hydraulic Diagram And Setting Of The Minimum, Maximum And Target Temperatures; Selecting The Hydraulic Diagram - WITA SM WR FR Series Installation Manual

Operating instrutions

7.2.2 Selecting and setting the target temperature

Basic display

7.2.3 Selecting and setting the mixer (valve) direction of rotation.

Basic display
7.3 Selecting the hydraulic diagram and setting the minimum,
maximum and target temperatures
The settings for the 'Hydraulic diagram' and the minimum and maximum temperatures can
only be selected during commissioning in the 'Controller commissioning' mode.

7.3.1 Selecting the hydraulic diagram

1. Return flow temperature
maintenance
36
WITA Fixed setpoint controller SM WR FR
and
Direction of ro-
tation against
the Clockwise
Return
temperature
control
The setting can be adjusted with the but-
tons and in 1° steps and confirmed
with the button. The change is imme-
diately shown on the display and the fixed
setpoint controller operates under the
new setting.
Direction of
rotation in the
Clockwise
2. Flow temperature
control
The setting can be
adjusted with the
and keys
and confirmed
with the key
Flow
temperature
control