Safety Instructions; General; Labelling Of Instructions In The Operating Instructions - WITA SM WR FR Series Installation Manual

Operating instrutions

2 Safety Instructions

2.1 General

These installation and operating instructions are a part of the
product, and contain basic information that must be observed
during installation, operation and maintenance. For this reason,
the installer and specialist personnel or operators must read
these instructions prior to set-up.
Please observe both the general safety instructions listed
under section 2 and the special safety instructions detailed in
the other sections.
A copy of the EC Declaration of Conformity is provided with
these instructions. This declaration shall be deemed void in the
event of a modification that has not been agreed with us.
2.2 Identification of notes in the operating instructions
24
WITA Fixed setpoint controller SM WR FR
General hazard symbol
Warning! Danger of personal injury!
Observe the relevant accident
prevention regulations.
Warning! Danger from electrical vol-
tage! Prevent hazards arising from
electrical energy. Observe the instructi-
ons in local or general regulations (e.g.
IEC, VDE, etc.), and those of the local
energy supplier.