Selecting The Sound Mode (Depending On The Model) - Samsung PS-42D5SD Owner's Instructions Manual

Selecting the Sound Mode
The "DUAL I-II" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "DUAL-I " or "Stereo", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM stereo
NICAM DUAL-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or DUAL-I/II
Stereo
Stereo
➢
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to Mono.
◆ If the stereo signal is weak and automatic switching
occurs, switch to Mono.
◆ When receiving mono sound in AV mode, connect to the
"AUDIO-L" input connector on the panel (front or side,
depending on the model). If mono sound only comes out
of the left speaker, press the DUAL I-II button.
(depending on the model)
On-screen indication
Mono (Normal use)
NICAM Mono ↔ Mono
NICAM stereo ↔ Mono
(Forced mono)
NICAM DUAL-I →
NICAM DUAL-II →
Mono
Mono
DUAL-I ↔ DUAL-II
Stereo ↔ Mono
(Forced mono)
English - 47