Selecting The Sound Mode (Depending On The Model) - Samsung PDP-TELEVISION Owner's Instructions Manual

Selecting the Sound Mode
The DUAL I-II button displays/controls the processing and
output of the audio signal. When power is switched on, the
mode is automatically preset to either "DUAL-I" or "Stereo",
depending on the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular + NICAM Mono
NICAM
NICAM Stereo
Stereo
NICAM DUAL-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or DUAL-I/II
Stereo
Stereo
➢
 If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
 If the stereo signal is weak and automatic switching occurs, switch to Mono.
 When receiving a mono sound in the AV mode, connect to the "AUDIO-L" input connector on the
panel (front or side). If the mono sound comes out only from the left speaker, press the DUAL I-II
button.
(depending on the model)
On-screen indication
Mono (Normal use)
NICAM
NICAM
stereo
NICAM NICAM
dual-1 dual-2
Mono (Normal use)
Dual I
Stereo
(Forced mono)
English - 34
Mono
(Normal)
Mono
(Normal)
Mono
(Normal)
Dual II
Mono