Subaru Crosstrek Hybrid 2020 Quick Manual page 35

REFUELING AND RECHARGING
CHARGING
Connecting the Charger
To connect the charger:
1. Insert the charge cable into the outlet of the external power source. Check that the
power indicator on the Charging Circuit Interrupting Device is illuminated.
NOTE: To reduce the load on the outlet and plug, use a string or something similar to hang
the Charging Circuit Interrupting Device on a hook or other object.
2. Open the charge port door.
3. Remove the charging connector cap and secure it to the cable.
4. Insert the charging connector into the
charge port by aligning the guide position
on the bottom of the charging connector
and pushing straight in until you hear a
click.
5. Make sure the charging indicator is
illuminated. It will turn off when charging is
complete.
When you want to lock the charging
connector, carry an access key fob and press
the charge cable connector lock switch. You
can also set the connector to auto lock or auto lock/unlock through the Multi-Function
Display (MFD).
While Charging
The Driver Assist indicator at the top of the combination meter will slowly blink (blue) while
charging.
Pressing the ignition switch to "ON" during charging will display the energy flow screen in
the Multi-Function Display (MFD). The remaining charge time and current state of charge
will display.
33