Subaru Crosstrek Hybrid 2020 Quick Manual page 21

LIGHT CONTROLS
1 AUTO: Rotate the end of the lever to
automatically turn your Subaru's lights on
or off, depending on the level of outside
light.
2 Running Lights: Rotate the end of the
lever to turn on the instrument panel
lights, parking lights, side marker lights,
tail lights, and license plate lights.
3 Headlights: Rotate the end of the lever to
turn on the headlights, instrument panel lights, parking lights, side marker lights, tail
lights and license plate lights.
4 High Beams: Push the lever forward to change from low beam to high beam. If
equipped, this also activates the High Beam Assist (HBA) system. Pull the lever back
to center to return to low beam.
5 Fog Lights: If equipped, rotate the dial to turn on the fog lights.
Illumination Brightness
While the light switch is on, rotating the dial on the instrument panel
upward will make the illumination brighter. When the dial is fully
rotated upward (dots aligned), the instrument panel illumination
stays at full brightness. Rotating the dial downward dims the
instrument panel illumination.
Daytime Running Lights
The daytime running lights automatically turn on when the engine has started, the parking
brake is fully released, the light switch is in the off, "AUTO" (if equipped) or "
position, and the select lever is not in the "P" position. Always turn on the headlights when
it's dark outside by rotating the dial to the "
CONTROLS
" or "AUTO" position.
"
19