Key Lockout - Cardinal 2XX-EIP Installation Manual

SETUP:
0BU
With the indicator ON, hold the SHIFT key down and press the Navigation ENTER key
(red square key in center of the Navigation arrows). The display will change to show the
SETUP/REVIEW MENU.
1.ENTER CALIBRATION AND SETUP
2.VIEW AUDIT TRAIL COUNTERS
3.CALIBRATE SCALE 1
Enter Selection: 1
Press the ENTER key, then press the NEXT Navigation arrow until SETUP MENU #3
is displayed.
1. G/N ACCUMS=XXX
2. BACK LITE=XX
3. PASSWORD
4. 2xx-EIP
Enter Selection: 0
There are no setup variables for the EIP option card, going to this menu just assures the
operator that the 225 can detect the presence of the option card.
Press the Navigation EXIT arrow until the indicator goes into the weight display mode.
SETUP/REVIEW MENU
^EXIT
SETUP MENU #3

6. KEY LOCKOUT

^PREV
Page 1 of 3
vEXIT