Running A Macro; Deleting A Macro; Configuring Favourite Channels (Fav Ch); Setting Up Favourites - Silvercrest SFB 10.1 C3 User Manual And Service Information

Running a macro

1. Press the
2. Within the next 5 seconds, press the number button 1 to 6 which
corresponds to the macro you want.
3. The command sequence programmed for this macro is sent.
If you do not press the corresponding number button within
5 seconds after you press the
control backlight flashes 3 times.
The same happens if the button you press after pressing the

Deleting a macro

1. Press and hold the
2. Press
3. Press
"MACRO6" and press
4. Press
display reads "SURE DELET".
5. Press
macro is shown again on the display.
Press to go back one menu level. To return to the start window,
press one of the device buttons.

Configuring favourite channels (FAV CH)

This function is supported in the modes TV, DSAT, CBL and AUX (if the
AUX device button has been programmed accordingly) only You can
save preferred channels as favourites.

Setting up favourites

1. Press the device button for the device that you wish to program.
2. Press and hold the
3. Press
4. Press
The display reads FAV-CH01.
5. Press
CH15") and press
button.
button has no macro assigned to it.
, select "MACRO" and press
, select "MACRO1" (or "MACRO2".....
, select "DELETE" and press
to confirm. The display reads "DELETED". The selected
, select "FAV CH" and press
, select "CONFIGURE" and press
, select "FAV-CH01" (or "FAV-CH02"..... "FAV-
to confirm. The display reads "SELECT KEY".
button for at least 3 seconds.
to confirm. The display reads "SET UP".
button for at least 3 seconds.
SilverCrest SFB 10.1 C3
button, the remote
to confirm.
to confirm. The
to confirm.
to confirm.
English - 63