The Learn Function (Learning); Programming Via The Learn Function (Learn Key) - Silvercrest SFB 10.1 C3 User Manual And Service Information

6. After choosing "ALL RESET", press
read „CONFIRM RST".
You can still press
7. Press
returns to the start window.
The day of the week and the time are not reset.
Choosing "MODE" restores the settings for the selected device only. The
procedure is as follows:
8. After you confirm your selection "MODE" by pressing
display shows the device currently selected. Select the device you
want by pressing the corresponding device button.
9. After confirming your choice with
"CONFIRM RST".
You can still press
10. Press to confirm your entry. The display reads "OK" and then
returns to the selection "MODE".
Press to go back one menu level. To return to the start window,
press one of the device buttons.

The learn function (LEARNING)

Programming via the learn function (LEARN KEY)

This function allows the remote control to learn individual buttons for a
selected device.
1. Press the device button for the device that you wish to program.
2. Press and hold the
3. Press
4. Press
5. The display reads "SELECT KEY".
All buttons except the device buttons support learning.
6. Press the button that you wish to learn a command. The display
reads "WAITING".
to cancel the reset at this point.
to confirm your entry. The display reads "OK" and then
to cancel the reset at this point.
, select "LEARNING" and press
, select "LEARN KEY" and press
to confirm. The display will
button for 3 seconds.
SilverCrest SFB 10.1 C3
, the display will read
to confirm.
to confirm.
English - 59
, the