Configuration Menus - Silvercrest SFB 10.1 C3 User Manual And Service Information

SilverCrest SFB 10.1 C3

Configuration menus

Press and hold the
default sub-menu is "LANGUAGE". To program the remote control
according to your needs, use the
sub-menu you want or press
the button to open the selected sub-menu.
If no entry is made for 30 seconds in setup mode, the
entries are not saved but cancelled. The remote control
returns to the start window. If necessary, start programming
again.
46 - English
Executes a macro when used together with one of the
number buttons 1 to 6.
Mutes or restores the sound output (MUTE).
Confirms a menu item in the remote control
"CONFIGURE" menu or in the menu of the selected
device.
Menu navigation: move up
Menu navigation: move down
Menu navigation: move left
Menu navigation: move right
Increase/decrease volume
1. TV mode: Next / previous channel
2. CD/DVD mode: SKIP function
AV input selection for the selected device
Use this button to enter two-digit channel numbers. This
function depends on the selected device. To enter a two-
digit channel number, first press the
then enter the channel number. Pressing the
button again allows you to enter a single-digit channel
number.
Toggles the remote control light on/off.
button for 3 seconds to open the menu. The
buttons to navigate to the
to return to the start window. Press
button and