Creating Programs (Multi-Phase); Creating/Deleting Phases - Firex BETTERPAN UDBRG A V1 Series Installation And Operation Manual

01-UDBRG.A_V1-DIMU-00-EN
18

CREATING PROGRAMS (MULTI-PHASE)

FROM SETTINGS> PROGRAMS> NEW
NEW PROGRAM
100°C
20°C
A PROGRAM CAN CONSIST OF 20 PHASES.
THE PARAMETERS ARE CONSTANT WITHIN EACH PHASE. IF A SINGLE VALUE CHANGES, YOU
NEED TO CREATE A NEW PHASE!
THE CREATION OF THE PHASE CONSISTS OF ENTERING THE COOKING METHOD, COOKING
TIMES, MIXER FUNCTIONS AND WALL HEATING.
IT IS ALSO POSSIBLE TO ENTER (IN EVERY PHASE) 3 MESSAGES PRESENT IN THE LEFT
COLUMN. (SEE MESSAGE SETTINGS)
18.1

CREATING/DELETING PHASES

ONCE THE PARAMETERS OF PHASE 1 ARE SET, YOU CAN THEN ADD PHASE 2:
>
AFTER HAVING ADDED AND SET THE PARAMETERS OF PHASE 2, PRESSING ON THE
PHASE/PHASE FIELD DISPLAYS THE FOLLOWING SCREEN:
54
CREATING PROGRAMS (MULTI-PHASE)
180°C 00:45:00
20°C
01:27: 35
17/12/ 2016
--:--:--
>