INTRODUCTION 02-CBT.A-TOUCH-01-EN INTRODUCTION OVERVIEW The heads of departments, where this machine will be installed, must ensure, in accordance with current legislation, that they have read the contents of this document carefully and ensure that operators and maintenance personnel have read the relevant parts.
02-CBT.A-TOUCH-01-EN SAFETY SAFETY OVERVIEW Read the warnings contained in this manual carefully as they provide important information regarding safe installation, maintenance and use. These appliances should only be used by personnel trained to use them. The appliance must be operated under close supervision. ...
SAFETY 02-CBT.A-TOUCH-01-EN WARNINGS All installation and maintenance work must only be carried out by a company belonging to the relevant industry register. Fire protection regulations must be strictly adhered to. The machine should be serviced at least once a year to ensure it is in prime condition.
Page 8
02-CBT.A-TOUCH-01-EN SAFETY The operator must also ensure that any persons present in the room maintain a safe distance of at least 2 metres from the perimeter of the machine, both while emptying and replacing the pan. The pressure cooking phases must be carried out with particular care as indicated in this manual.
SAFETY 02-CBT.A-TOUCH-01-EN TABLE OF PAN PRODUCT LEVELS ATTENTION: The cooking pan must be filled respecting the minimum and maximum values (including the food to be cooked) indicated in the table depending on the cooking method. ATTENTION: Failure to comply with this requirement may cause serious injury to persons and compromise the operation of the appliance Cooking method PAN LEVELS TO BE RESPECTED...
02-CBT.A-TOUCH-01-EN SAFETY PRESSURE COOKING (SAFETY WARNINGS) Carefully observe the following indications when pressure cooking: 1. Respect the product loading levels in the pan! 2. When the icon appears DO NOT ATTEMPT TO OPEN THE LID!!! A dangerous pressure has been reached inside the pan!!! ATTENTION: If there is a power cut when pressure cooking, the pressure in the pan is brought to atmospheric pressure by the automatic opening of the solenoid valve.
SAFETY 02-CBT.A-TOUCH-01-EN 2.4.1 CLOSING THE PRESSURE COOKER LID When the icon appears Closing the lid in pressure cooker mode a. Turn handle 1 anticlockwise Lid position unlocked (NO pressure cooking) b. Turn handle 2 anticlockwise until it is Lid position locked (pressure cooking) locked.
02-CBT.A-TOUCH-01-EN SAFETY 2.4.2 OPENING THE PRESSURE COOKER LID When the icons appear Opening the lid as described below. Lid position locked (pressure cooking) a. Release the lock and gently turn handle 2 clockwise. b. Wait for the residual steam to escape from vent 3. c.
DESCRIPTION OF THE MACHINE 02-CBT.A-TOUCH-01-EN DESCRIPTION OF THE MACHINE DESCRIPTION Round Bratt pans with built-in mixer, ideal for cooking meat, sauces, risotto, fillings and for all those dishes that require the ingredients to be worked gently. Uniform cooking and a high-quality end product are the result of cutting edge and simple to use technology.
02-CBT.A-TOUCH-01-EN DESCRIPTION OF THE MACHINE OPERATING PARTS 01 Technical Data Plate 13 Safety valve 02 Plate serial no. 14 Condensate drain 03 Emergency button 15 Sensor in the pan 04 Control panel 16 Mixer 05 Cooking pan 17 Mixer locking ring 06 Fill tap 18 Steam vent (mod.CBTG) 07 Lid...
02-CBT.A-TOUCH-01-EN DESCRIPTION OF THE MACHINE OPTIONAL 3.5.1 Shower for washing The shower has a twist-out type system. Pull out gently until the desired or maximum length is reached. To return, it is necessary to tug gently outwards and then twist it back into position. Press the black lever to operate the water jet.
SETTINGS MENU 02-CBT.A-TOUCH-01-EN SETTINGS MENU PROGRAMS LANGUAGES FIRMWARE DATE-HOUR EXPORT TEST I/0 PARAMETERS COLORS IMPORT PROGRAMS Creating-editing cooking programs LANGUAGES Language setting FIRMWARE Firmware update (from USB) DATE-HOUR Current Date and Time setting TEST I/0 Test I/O board (only with password) ...
02-CBT.A-TOUCH-01-EN COOKING LAYOUT STATUS BAR 01:27: 35 XXX1234 17/12/ 2016 STAND-BY/RETURN KEY; 3 sec → HOME ↓ COOKING/PROGRAM IN PROGRESS. ↓ COOKING/PROGRAM IN PROGRESS (PAUSED) AWAITING ACTION. XXX1234 Name of cooking program selected PROGRAM IN THE LIST OF FAVOURITES (not present in manual cooking) PROGRAM PHASE IN PROGRESS (not present in manual cooking) 01:27: 35 CURRENT TIME AND DATE...
COOKING LAYOUT 02-CBT.A-TOUCH-01-EN COOKING AREA < TIME TYPE COOKING METHOD> 100°C 180°C 00:45:00 < SETPOINT SETPOINT > --:--:-- < COUNTDOWN VALUE MEASURED> 20°C 20°C HEATING IN OPERATION MINIMUM HEATING HEATING OFF AS SETPOINT REACHED OR FOR WAITING (L COLUMN ICONS)
02-CBT.A-TOUCH-01-EN COOKING LAYOUT 9.2.1 COOKING ICONS (MEANING) Left or central icon: main control (when the SETPOINT is reached, heating stops and the countdown of the cooking time starts) ↓ ↑ Right icon: secondary control (when the SETPOINT is reached, the heating stops) Name Icon Description...
COOKING LAYOUT 02-CBT.A-TOUCH-01-EN MESSAGE COLUMN (L) INFORMATION AND REQUESTS INDICATOR L COLUMN buzzer Light Icon Description Behaviour Indicator Pan out of position (for Icon present when pan out of position cooking) Pan movement not Icon present only when you want to allowed perform a pan movement in an unauthorised phase.
02-CBT.A-TOUCH-01-EN COOKING LAYOUT buzzer Light Icon Description Behaviour Indicato Safety thermostat has Icon present when the safety thermostat been triggered has been triggered. To reset the alarm, restore the safety thermostat. Insufficient gas pressure Icon present when gas pressure switch has been triggered.
COOKING LAYOUT 02-CBT.A-TOUCH-01-EN FUNCTION BAR EXTRA KEY (functions) START/STOP KEY DELAYED COOKING KEY ↓ ↓ ↓ 9.5.1 START-STOP KEY FOR RUNNING PROGRAMS Attention: the START/STOP key indicates the action that will be performed by pressing the key! The machine status is indicated by the icon on the top left icon on the top left With key presence Machine status...
Page 28
02-CBT.A-TOUCH-01-EN COOKING LAYOUT To avoid accidentally stopping the cooking program in progress, press the STOP key and the following screen appears: If the STOP key has been pressed incorrectly, wait approximately 5 seconds and you return to the program in progress. If instead you want to stop the program, slide the coloured square from the triangle to the square and release the key.
COOKING LAYOUT 02-CBT.A-TOUCH-01-EN < 9.5.2 EXTRA KEY Press the key to access pan H2O filling and pan tilting functions. FILL PAN WITH H2O PAN MOVEMENT ↓ ↓ START 0 Lt 0 Lt FILLING PAN WITH H2O LITRE-COUNTER DEVICE ACCURACY +/- 2% AND MAX H2O TEMPERATURE 90°C ...
02-CBT.A-TOUCH-01-EN COOKING METHODS IN DETAIL COOKING METHODS IN DETAIL 10.1 COOKING CBT.. Icon Description For braising that requires a temperature up to 220°C; the temperature regulation is controlled by the sensor (PT1000) located on the bottom of the For gentle cooking; the temperature regulation is controlled by the sensor (PT1000) located inside the pan, in contact with the product, and by the sensor located on the bottom of the pan.
SETTING SETPOINT PARAMETERS 02-CBT.A-TOUCH-01-EN SETTING SETPOINT PARAMETERS 11.1 SETTING SETPOINT VALUES WITH THE KEYPAD The following screen appears when setting any setpoint value: left column: parameter of which you are changing the setpoint value. right column: keypad + cursor for changing the setpoint. ------------------- 100°C 20°C...
Page 32
02-CBT.A-TOUCH-01-EN SETTING SETPOINT PARAMETERS The values in the right column will be changed as follows: SETTING WITH KEYPAD TYPE THE DESIRED VALUE. ATTENTION : THE VALUE MUST BE BETWEEN min AND max! SETTING WITH CURSOR QUICK SETTING PRECISE SETTING ------------------ ------------------ ←...
COOKING PARAMETERS SETTING 02-CBT.A-TOUCH-01-EN COOKING PARAMETERS SETTING The setting of the following parameters can only be made from the menu: 1. PROGRAMS + MANUAL 2. SETTINGS + PROGRAMS 12.1 SETTING COOKING METHOD AND TEMPERATURE 180°C 00:45:00 100°C 20°C --:--:-- 20°C AREA HIGHLIGHTED = SELECTION/SETTINGS SETTING COOKING METHOD SELECTING COOKING METHOD (see Cooking...
02-CBT.A-TOUCH-01-EN COOKING PARAMETERS SETTING 12.2 SETTING COOKING TIME SELECTING COOKING TIME < COOKING TIME SETPOINT (see SETPOINT) 00:45:00 < COOKING TIME COUNTDOWN --:--:-- SELECTING COOKING TIME Cooking time Cooking time Infinite time (at setpoint °C) (immediate) → → → ATTENTION: WHEN SELECTING THE INFINITE TIME, PRESS THE KEY INDICATED BELOW TO TERMINATE THE PROGRAM IN PROGRESS.
Page 35
COOKING PARAMETERS SETTING 02-CBT.A-TOUCH-01-EN SETTING COOKING TIME SETPOINT Only with 00:45:00 ↓ --------------- 00:45:00 HH:MM:SS HH: 99 max; MM: 59 max; SS: 59 max...
02-CBT.A-TOUCH-01-EN CREATING PROGRAMS (MULTI-PHASE) CREATING PROGRAMS (MULTI-PHASE) FROM SETTINGS> PROGRAMS> NEW 01:27: 35 NEW PROGRAM 17/12/ 2016 180°C 00:45:00 100°C 20°C --:--:-- 20°C A PROGRAM CAN CONSIST OF 20 PHASES. THE PARAMETERS ARE CONSTANT WITHIN EACH PHASE. IF A SINGLE VALUE CHANGES, YOU NEED TO CREATE A NEW PHASE! THE CREATION OF THE PHASE CONSISTS OF ENTERING THE COOKING METHOD, COOKING TIMES, MIXER FUNCTIONS AND WALL HEATING.
Page 37
CREATING PROGRAMS (MULTI-PHASE) 02-CBT.A-TOUCH-01-EN > SHOWS THE CURRENT PHASE RETURNS TO PHASE 1 SETTINGS ENTERS A NEW PHASE AFTER THE HIGHLIGHTED PHASE (e.g. if the program consists of 2 phases and I want to insert a phase between 1 and 2, I have to select phase 1 and press the + key, phase 2 becomes 3 and you need to set the parameters for phase 2).
02-CBT.A-TOUCH-01-EN CREATING PROGRAMS (MULTI-PHASE) 13.2 MESSAGE SETTINGS The following screen appears when selecting the message icon: 01:27:35 NEW PROGRAM 17/12/2016 ______ _______ ↑ ↑ ↑ MESSAGE SELECTION KEYS MESSAGE SETTINGS KEYS MESSAGE WRITING AREA MESSAGE SELECTION KEYS Icon Description MESSAGE AT THE BEGINNING OF THE PHASE MESSAGE ON REACHING SETPOINT MESSAGE AT THE END OF THE PHASE...
Page 39
CREATING PROGRAMS (MULTI-PHASE) 02-CBT.A-TOUCH-01-EN MESSAGE SETTINGS KEYS THE KEY ON THE TOP RIGHT TAKES ON THE FOLLOWING FUNCTIONS SPECIFIED IN RELATION TO THE SELECTED MESSAGE (START; SET °C: END) START MESSAGE Behaviour when program running No message appears The message appears ...
Page 40
02-CBT.A-TOUCH-01-EN CREATING PROGRAMS (MULTI-PHASE) ATTENTION : IF THE MESSAGE IS SET TO OFF, ALL THE SETTINGS DESCRIBED BELOW (FLASHING, BUZZER, AND TEXT) WILL NOT APPEAR WHEN THE PROGRAM IS RUNNING! THE FOLLOWING KEYS HAVE THE SAME FUNCTIONS FOR ALL MESSAGES (START; SET °C; END) Flashing (optional) Right key...
Page 41
CREATING PROGRAMS (MULTI-PHASE) 02-CBT.A-TOUCH-01-EN ENTERING MESSAGE TEXT 01:27: 35 NEW PROGRAM 17/12/ 2016 USE THE KEYPAD TO ENTER A DESCRIPTIVE TEXT (MAX 200 CHARACTERS) AND CONFIRM WITH THE KEY AFTER HAVING SET ALL THE VARIABLES WITHIN THE MESSAGE, THE RELATED MESSAGE ICON WILL SHOW WITHIN ALL THE SYMBOLS THAT SUMMARISE THE SETTINGS OF THE MESSAGE ITSELF.
02-CBT.A-TOUCH-01-EN CREATING PROGRAMS (MULTI-PHASE) 13.3 SAVING A PROGRAM IF YOU WANT TO ADD THE PROGRAM TO THE LIST OF FAVOURITES, PRESS THE "STAR" SYMBOL. 01:27: 35 NEW PROGRAM 17/12/ 2016 Program NOT added to favourites Program added to favourites PRESS THE "SAVE"...
CREATING PROGRAMS (MULTI-PHASE) 02-CBT.A-TOUCH-01-EN ENTER THE PROGRAM NAME AND CONFIRM WITH THE KEY ATTENTION : THE PROGRAM DOES NOT PERFORM A CHECK TO SEE IF A PROGRAM WITH THE SAME NAME ALREADY EXISTS. 2 PROGRAMS WILL BE SAVED WITH THE SAME NAME, WITH HE POSSIBILITY OF RENAMING THEM.
02-CBT.A-TOUCH-01-EN RUNNING A PROGRAM/MANUAL COOKING 13.5 DELETING A PROGRAM FROM SETTINGS> PROGRAMS SELECT THE CATEGORY OF THE PROGRAM OR ALL SELECT THE PROGRAM YOU WANT TO DELETE BY PRESSING ON THE NAME OF THE PROGRAM FOR ABOUT 2 SEC. ...
RUNNING A PROGRAM/MANUAL COOKING 02-CBT.A-TOUCH-01-EN THE SCREEN BECOMES 01:27: 35 MANUAL 17/12/ 2016 100°C 180°C 00:45:00 --:--:-- 20°C 20°C A SYMBOL APPEARS ON THE SIDE OF THE VALUE READ WITH THE FOLLOWING MEANINGS: HEATING IN OPERATION MINIMUM HEATING ...
02-CBT.A-TOUCH-01-EN RUNNING PROGRAMS (MULTI-PHASE) RUNNING PROGRAMS (MULTI-PHASE) 15.1 RUNNING PROGRAMS (MULTI-PHASE) FROM PROGRAMS> SELECT THE PROGRAM THAT YOU WANT TO RUN FROM THE FOLDER: ALL; CATEGORY (MEAT, SAUCES, ETC) OR FAVOURITES PRESS THE START KEY NOTE 1) WHEN RUNNING THE PROGRAM YOU CAN CHANGE THE TEMPERATURE AND TIME SETPOINT (ONLY IN THE PHASE IN WHICH THE PROGRAM IS CURRENTLY RUNNING) BY PRESSING IN THE FIELD CORRESPONDING TO THE SET VALUES FOR ABOUT 2 sec.
Page 47
RUNNING PROGRAMS (MULTI-PHASE) 02-CBT.A-TOUCH-01-EN NOTE 4) IF YOU ARE RUNNING A PROGRAM WITH ACTIVE MESSAGES, WHEN THE MESSAGE APPEARS, THE OPERATOR: CAN PRESS THE BUZZER OR TURN OFF THE FLASHING (IF PRESENT IN THE MESSAGE) MUST CONFIRM THE OPERATION REQUESTED TO CONTINUE WITH THE PHASE OR TO MOVE ON TO THE NEXT PHASE.
02-CBT.A-TOUCH-01-EN RUNNING PROGRAMS (MULTI-PHASE) ONCE THE TIME HAS RUN OUT, THE FOLLOWING MESSAGE WILL REAPPEAR: END THE PHASE? --:--:-- --:--:-- 15.2 END OF PROGRAM EITHER WAIT FOR THE END OF PROGRAM OR PRESS THE STOP KEY (+ CONFIRM). IF THE SET TIME IS (INFINITE) , COOKING/HEATING CAN ONLY BE ENDED BY PRESSING THE STOP KEY!
COOKING WITH DELAY TIMER 02-CBT.A-TOUCH-01-EN COOKING WITH DELAY TIMER After having chosen the program to run, press the button to access the settings for cooking with delay timer. It is possible to set the delayed start in two ways: Top row: setting the start date and time: set the hour and minutes, and, if necessary, the day (with a maximum of 7 days in advance).
02-CBT.A-TOUCH-01-EN FILLING PAN WITH H2O FILLING PAN WITH H2O 17.1 FILLING THE PAN WITH H2O USING A LITRE-COUNTER DEVICE START 0 Lt 0 Lt Select hot or cold water. Press on the Lt. Field 0 Lt Set the number of litres you want to add and confirm with START ----------------- 120 Lt...
Page 51
FILLING PAN WITH H2O 02-CBT.A-TOUCH-01-EN Press the "START" key START 120 Lt 0 Lt 120 Lt litres set START 10 Lt litres added If you want to stop filling with water before the number of litres set is reached, press the "START"...
02-CBT.A-TOUCH-01-EN FILLING PAN WITH H2O 17.2 MANUALLY FILLING THE PAN WITH H2O START 0 Lt 0 Lt select hot or cold water Keep the "START" key pressed down for the desired number of litres 0 Lt START 10 Lt litres added...
USING THE MIXER 02-CBT.A-TOUCH-01-EN USING THE MIXER 18.1 MIXER SETTINGS 2 sec. Speed Select the type of mixing Select the field to edit. Speed Set the desired values with the keypad. sec. sec.
02-CBT.A-TOUCH-01-EN USING THE MIXER Attention: When creating multi-phase programs, if you do NOT want to use the mixer in a certain phase, you need to press key select mixing type (in dark grey), so that all the keys have a light grey background (the area for setting values also disappears: speed;...
USING THE MIXER 02-CBT.A-TOUCH-01-EN 18.3 STARTING THE MIXER (MULTI-PHASE PROGRAM) If the selected program involves the operation of the mixer, after pressing the START key, a message will appear with a countdown for mixer start up. If you do NOT want to start the mixer, press the "STOP MIXER" key. If you do want to use it, simple wait for the time to run out.
02-CBT.A-TOUCH-01-EN WALL HEATING (CBTE ..AC) WALL HEATING (CBTE ..AC) 19.1 WALL HEATING SETTINGS 2 sec. 100°C 20°C Select the heating levels Depending on the quantity of product present in the pan, it is possible to select the level to be heated. Attention: to prevent the surface of the product from burning, select the correct number of levels depending on the product present in the pan.
WALL HEATING (CBTE ..AC) 02-CBT.A-TOUCH-01-EN 19.2 STARTING WALL HEATING (MANUAL COOKING PROGRAM) After setting the parameters, to start heating, press the key in the right column. To turn it off, press the key again. Heating NOT active, dark grey key - heating active, light grey key. 19.3 STARTING WALL HEATING (MULTI-PHASE PROGRAM) If the program phases involve wall heating, the heating in the specific phase will be activated...
02-CBT.A-TOUCH-01-EN MOVING THE PAN MOVING THE PAN To move the cooking vessel, keep pressed the corresponding key on the display or external keypad. The keys on the display are disabled when the pan tilting limits are reached. With a completely horizontal pan = enabled only With a tilted pan = enabled only DISPLAY KEYPAD...
Page 59
MOVING THE PAN 02-CBT.A-TOUCH-01-EN Any messages that prevent pan movement appear in the left column. Icon Description Pan movement not allowed Request to completely open the lid (for pan movement) Request to turn the tap (for pan movement) ATTENTION: In machines with mixer, to make it easier to empty the product, the mixer can be operated (only at minimum speed and in a clockwise direction) by keeping the key pressed.
02-CBT.A-TOUCH-01-EN CLEANING AND CARE CLEANING AND CARE 21.1 GENERAL INFORMATION Do not use aggressive substances or abrasive detergents when cleaning stainless steel parts. Avoid using iron scourers on steel parts as rust formation may occur. For the same reason avoid contact with ferrous materials. No sandpaper or abrasive paper should be used during cleaning.
CLEANING AND CARE 02-CBT.A-TOUCH-01-EN 21.3 MIXER CLEANING To facilitate cleaning operations, the mixer can be removed from the pan by following the instructions below: -Tilt the cooking vessel up to 30-40°. - Unscrew the "mixer locking ring"(01) - Extract the "mixer" (02) taking care not to lose the Teflon sealing ring (03). Gently place the mixer on the ground.
02-CBT.A-TOUCH-01-EN CLEANING AND CARE 21.4 CLEANING THE PRESSURE COOKER SYSTEM Clean the pressure system as described below: 1) Pour in water equal to about 10% of the pan's capacity (e.g. mod.180 = 18 litres), or about 2/3 cm of water in the bottom of the pan. 2) Start a 5-minute pressure cooking cycle...
CLEANING AND CARE 02-CBT.A-TOUCH-01-EN 21.6 PRECAUTIONS IN CASE OF PROLONGED INACTIVITY If the appliance has been inactive for a prolonged period of time (holidays, seasonal work...), clean well, remove any residue and ensure it is dry. Leave the lid open so that air can circulate inside the pan. The room must be sufficiently ventilated.
02-CBT.A-TOUCH-01-EN MAINTENANCE MAINTENANCE 22.1 MAINTENANCE OF THE APPLIANCE All maintenance work must only be performed by a specialist technical service centre! In order to keep the appliance working efficiently, it is advisable to perform annual maintenance, which includes checking the status of components subject to wear and tear (pipes, etc.).
Page 65
MAINTENANCE 02-CBT.A-TOUCH-01-EN MONTHLY CHECKS 6. Perform the SAFETY VALVE check (step 3) QUARTERLY CHECKS 7. Clean the mixer motor fan with compressed air or a suction device. 8. Check the following are undamaged and intact: Screen controls, switches, warning lights. ...
02-CBT.A-TOUCH-01-EN DISPLAY MESSAGES DISPLAY MESSAGES Message Meaning Solution Safety thermostat has been triggered Reset the thermostat from the lower panel on The safety thermostat can be disarmed the right hand side, by during transport without any issues. pressing firmly on the red thermostat key.