Change Record - Esko Kongsberg X Series User Manual

2

2. Change Record

Date
dd-mm-yy
20-05-2016
06-09-2016
07-10-2016
18-10-2016
24-10-2016
12-11-2016
15-11-2016
18-11-2016
28-11-2016
29-11-2016
14-12-2016
03-02-2017
15-02-2017
28-02-2017
20-04-2017
07-08-2017
28-08-2017
30-08-2017
06-11-2017
28-11-2017
01-12-2017
13.09.2018
26.08.2019
10
By Description
jhbe Document is updated according to iPC ver 2.0
jhbe The importance of MultiCUT chuck cleaning is
emphasized
jhbe Information about LubriCool added
jhbe CorruSpeed information updated
jhbe MultiCUT-HP, new chiller and information about
old chiller added
jhbe iBF Board Feeder information added
jhbe MultiZone Production, recommended workflow
emphasized.
jhbe V-notch description improved.
jhbe Measuring foot, soft springs introduced.
jhbe Psaligraphy knife tool information added
jhbe MultiCUT-HP chapters updated
jhbe TakeUp Unit, information added
jhbe MultiCUT Sleeve Adjustment Tool, information
added
jhbe i-BF Board Feeder, information updated
jhbe Bevel 45 tool adapter description added
jhbe The importance of Braille tool height adjustment
has been emphasized.
jhbe The use of LubriCool Nozzle Unit and Suction
Ring, description added.
jhbe VI30-16 Knife Tool, description added.
VI45-10/12 Knife Tool, description added.
jhbe Droplets from cooling water connections,
description added
jhbe List of tools that can be used for X-Pad calibration
has been updated
jhbe Motorized Roll Feeder, information added
DHO Reverse operation by use of camera added.
DHO Motorized Roll Feeder section updated.
Kongsberg X-series