Table of Contents
Advertisement
Quick Links
We remind you that only the Esko staff, or persons having received
appropriate training, are allowed to handle, manipulate or do repairs on the system.
This copyright does not indicate that this work has been published.
All rights strictly reserved. Reproduction or issue to third parties in
any form whatever is not permitted without written authority from the publisher.
Esko reserves the right to change specifications without notice.
Document number: D3123
Status: 110126
How to get started
Kongsberg XP Auto systems
Serial number: __________
Please Read This First
A Publication of: Esko-Graphics Kongsberg AS
Copyright © 1984-2014 Esko.
with
Note
P.O.Box 1016, N-3601 Kongsberg, Norway
Tel: +47 32 28 99 00 Fax: +47 32 28 85 15 / 32 28 67 63
Esko-Graphics Kongsberg AS
www.esko.com
Advertisement
Table of Contents
Related Manuals for Esko Kongsberg XP Auto Series
Summary of Contents for Esko Kongsberg XP Auto Series
- Page 1 Serial number: __________ Please Read This First Note We remind you that only the Esko staff, or persons having received appropriate training, are allowed to handle, manipulate or do repairs on the system. A Publication of: Esko-Graphics Kongsberg AS Copyright © 1984-2014 Esko.
-
Page 2: Table Of Contents
Esko shall not be liable for any direct, indirect, consequential or incidental damages arising out of the use or inability to use the system or the information contained herein. - Page 3 How to get started, XP Auto EC DECLARATION OF CONFORMITY FOR MACHINERY in the sense of the EC-directive 2006/42/EC Annex 11, 1A Manufacturer: Esko-Graphics Kongsberg AS, Kirkegårdsveien 45, N-3600 Kongsberg, Norway For manufacturing plant, see type plate. The manufacturer declares that Product:...
- Page 4 We hereby confirm that our standard products are free from the defined forbidden materials as of the date of this statement, and consequently fully in compliance with said directive coming into force on July the 1st 2006. _________________________ Emil Skarra Managing Director Esko-Graphics Kongsberg AS...
-
Page 5: Introduction
How to get started, XP Auto 1. Introduction Dear customer Welcome to co-operation with Esko. This document is a brief introduction to the system you are about to receive. 2. Where to find information The following documentation is available for the equipment... - Page 6 The information you need for planning and preparing the installation of the Kongsberg XP Auto system is described in the Site Preparation Instruction handbook. All preparations given in that handbook should be completed before the Esko Service Engineers arrive on-site to assemble the system.
-
Page 7: Safety Issues
A specification of the delivery is found in the 'Customer Specification sheet' following the shipment. 5. Unpack the equipment Only Esko Service Engineers are allowed to unpack the equipment. 6. Installation Only Esko Service Engineers are allowed to install the equipment. -
Page 8: Start-Up And Shut-Down Procedures
How to get started, XP Auto 7. Start-up and Shut-down procedures 7.1 Start up Turn on the PC. From the desktop, start XP-Guide. Follow the start-up procedure described in the User Manual. 7.2 Shut down Follow the shut-down procedure described in the User Manual. 8. -
Page 9: What Can The System Be Used For
10. Who are allowed to use the system? Only personnel trained by Esko authorized personnel are allowed to operate the system. Training will be given to customer appointed operator(s) by the Esko Service Engineer as part of the installation. The training covers: ... -
Page 10: Software Updates
The procedure is also described in the User Manual. 12. Maintenance The maintenance done by the customer is limited to preventive maintenance. This is described in the User Manual. Any other maintenance, repair, replacement of parts etc. must be done by Esko authorized personnel only.
Need help?
Do you have a question about the Kongsberg XP Auto Series and is the answer not in the manual?
Questions and answers