Daily Light Integral (Dli) Readings; Mounting Bracket Configurations - Spectrum Technologies LIGHTSCOUT 3415A Product Manual

Quantum par light meter

Table of Contents

Meter Operation

Daily Light Integral (DLI) Readings

The DLI calculation can be reset to zero by pressing and holding

both the POWER and SCAN buttons simultaneously until you the

DLI value changes to 0.0. The integration and calculation of DLI will

start accumulating a new 24 hours' worth of 3-minute readings from

that point forward.

Lanyard

Hanger / Magnet

The LightScout

Light Meter takes a light reading

every 3 minutes to use in calculat-

ing a 24-hour Daily Light Integral

(DLI). Every 15 minutes the previ-

ous 24 hours of stored readings

are used to recalculate the DLI.

Readings are automatically taken

whether the meter is on or off, as

long as there is a battery in the

meter. The current DLI value will

be displayed on the LCD for 3 sec-

onds every time the meter is

turned on, including after a power

cycle (off and on).

Stake

Quantum PAR

Vertical Stand

Table of Contents

Do you have a question about the LIGHTSCOUT 3415A and is the answer not in the manual?