Advertisement
Page
Question
Standard Code Change Mechanical Digital Lock
General Questions for SBL300, SBL310, SBL340, SBL350, SBL370
4
Q The door will not open when the code is entered into the lock.
4
Q I have changed the code from the original code and it will not work when I entered the
new code into the digital lock.
4
Q How many digits can I enter in the code
5
Q The knob handle of my standard code change digital keypad has got too much movement
within it before having even entered the correct code, is it faulty.
5
Q The inside pad handle will only turn in one direction and causes injury to the hand, is there
anyway of changing the pad handle to turn in the opposite direction
5
Q Can I remove the hold back facility
6
Q The latch has broke on the digital lock, can I get a replacement.
6
Q The springs have collapsed on the inside handle do you do a replacement for the springs.
6
Q I have some fixings missing in the parts pack, can I order spare parts
6
Q When I put the spindle through the door it does not locate in the inside unit.
6
Q The latch will not return to its fully extended position once having operated it through
either the external or internal part of the digital lock.
6
Q The latch does not enter the striker supplied.
General Questions for SBL300/ SBL310
7
Q I want to change the SBL310 for a Digital Lock with Easy Code, is this possible
7
Q Do you provide a 50 mm backset latch for the SBL310.
7
Q Do you do a SBL300 with a holdback option.
General Questions for SBL340/ SBL350
7
Q The knob handle on my SBL340/SBL350 digital keypad side will only rotate in one direction
have I got the wrong handed unit
Mechanical Digital Locks
2 of 11
Advertisement
Need help?
Do you have a question about the SBL300 and is the answer not in the manual?
Questions and answers