Advertisement
GIANT
Little
Pump Company
3810 N. Tulsa Street
Oklahoma City, Oklahoma 73112
(405) 947-2511
·
INSTALLATION
·
This instruction sheet will provide you with information required to safely own and operate the Little
Giant encapsulated 1-EA Series pump. The pump you have purchased is a submersible epoxy
encapsulated pump (some models are for in-line use) with outer case constructed of durable die cast
aluminum and polyester.
This instruction sheet covers the standard models of the 1-EA series. Always order replacement
parts for the specific Catalog Number of your pump. If the catalog number of your pump is not listed in
the replacement parts section, then caution should be exercised when ordering replacement parts.
The Little Giant pumps are carefully inspected, tested and packaged to insure safe operation.
When you receive your pump, examine it carefully to determine that there are no broken or damaged
parts that may have occurred in shipment. If damage has occurred, make notation and notify the firm
from which you purchased the pump. They will assist you in the replacement or repair of the pump.
READ INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL, OPERATE OR
SERVICE THE LITTLE GIANT PUMP. KNOW THE PUMP APPLICATION, LIMITATIONS, AND
POTENTIAL HAZARDS. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY
INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL
INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
1.
DO NOT USE TO PUMP FLAMMABLE OR EXPLOSIVE FLUIDS SUCH AS GASOLINE, FUEL OIL,
KEROSENE, ETC. DO NOT USE IN EXPLOSIVE ATMOSPHERES. PUMP SHOULD ONLY BE USED
WITH LIQUIDS COMPATIBLE WITH PUMP COMPONENT MATERIALS.
INTRODUCTION
The inside case is filled with a special heat transfer epoxy.
SAFETY GUIDELINES
SMALL SUBMERSIBLE
ENCAPSULATED PUMPS
1-EA SERIES
·
MAINTENANCE
·
REPAIR PARTS
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Little Giant 1-EA Series
Summary of Contents for Little Giant 1-EA Series
- Page 1 This instruction sheet will provide you with information required to safely own and operate the Little Giant encapsulated 1-EA Series pump. The pump you have purchased is a submersible epoxy encapsulated pump (some models are for in-line use) with outer case constructed of durable die cast aluminum and polyester.
- Page 2 DO NOT HANDLE UNIT WITH WET HANDS OR WHEN STANDING ON A WET OR DAMP SURFACE OR IN WATER. DO NOT PULL THE PUMP OUT OF THE WATER BY THE POWER CORD WHEN THE PUMP IS OPERATING OR CONNECTED TO POWER SOURCE. THIS PUMP IS SUPPLIED WITH A GROUNDING CONDUCTOR AND /OR GROUNDING TYPE ATTACHMENT PLUG.
- Page 3 If it does not rotate, if pump is tripping circuit breakers, or not operating properly after cleaning, return to Little Giant Pump Company or its authorized service center. DO NOT attempt repairs yourself.
- Page 4 LITTLE GIANT WARRANTY STATEMENT Your Little Giant product is guaranteed to be in perfect condition when it leaves our Factory. It is warranted against defective materials and workmanship for a period of 12 months (90 day warranty on Models: 1-AA-OM, GKPK-SC, PP-1, PPS-1, PP-12, PPS-12 , PP-230 and Cooler King) from date of purchase by the user.
Need help?
Do you have a question about the 1-EA Series and is the answer not in the manual?
Questions and answers