Table of Contents
Advertisement
Quick Links
For residential, medium commercial and light industrial
applications, the Model 9S Series Wastewater and
Sewage Ejector pumps feature a 2" discharge, with a
maximum lift of 18'. Cast iron housing, cover and volute
have a protective epoxy coating.
9S Series
Upper bearing sleeve
sintered for smooth
operation and
Cast iron cover,
housing & volute
w/protective
epoxy coating to
resist corrosion
Features
Handles liquids and solid waste materials up to
n
2" diameter
Cast iron pump housing and cover with protective
n
epoxy coating for corrosion resistance
Oil-filled motor housing for lifetime lubrication
n
and rapid heat dissipation
Stainless steel fasteners
n
Mechanical seals (stainless steel spring, nitrile
n
parts, carbon and ceramic faces)
Thermal overload protection
n
Manual and Automatic models available
n
Automatic operation has 9" to 14" "On" level
n
and 2" to 6" "Off" level range with piggyback
mechanical float switch
All 115 volt models are UL/CSA listed
n
extended life
Eliminator Series
Sewage Ejector Pump
Stainless steel
screws
Oil-filled to
dissipate heat
for maximum life
Motor designed
for maximum
performance
Lower ball
bearing
Carbon & ceramic
face seal
Glass-filled nylon
vortex impeller
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Little Giant Eliminator Series
Summary of Contents for Little Giant Eliminator Series
- Page 1 Eliminator Series Sewage Ejector Pump 9S Series Features Handles liquids and solid waste materials up to 2" diameter Cast iron pump housing and cover with protective epoxy coating for corrosion resistance Oil-filled motor housing for lifetime lubrication and rapid heat dissipation Stainless steel fasteners Mechanical seals (stainless steel spring, nitrile parts, carbon and ceramic faces) Thermal overload protection Manual and Automatic models available Automatic operation has 9" to 14" “On” level and 2" to 6" “Off” level range with piggyback mechanical float switch All 115 volt models are UL/CSA listed Upper bearing sleeve Stainless steel sintered for smooth screws operation and extended life Oil-filled to dissipate heat...
- Page 2 9S Series Specifications Performance (GPM@Head) Shutoff Model Solids Size Running Cord Weight Dimensions Item No. Listing Volts (dia. in.) Amps/Watts P.S.I. Length (ft.) (lbs.) H x L x W (in.) 9S-CIM 509400 UL/CSA 4/10 2" 13/1020 — 11.6 x 10.3 x 6.8 9S-CIA-RFS 509500 UL/CSA...
- Page 3 National Electrical Code. Do not use the power cord for lifting the pump. Little Giant Submersible Sewage Ejector Pumps are recommended for use in basins or lift stations and suitable for pumping sewage, effluent, wastewater The pump motor is equipped with an automatic resetting thermal protector and and other non-explosive, non-corrosive liquids with up to 2”...
- Page 4 Table 1 DO NOT REMOVE MOTOR HOUSING COVER. WARRANTY IS VOID IF MOTOR HOUSING COVER, IMPELLER OR SEALS HAVE BEEN REMOVED. ANY FUSE OR REPAIR ON MOTOR MUST BE DONE BY AN AUTHORIZED LITTLE GIANT H.P. VOLTAGE CIRCUIT BREAKER AMPS SERVICE CENTER.
- Page 5 Figure 4 ITEM PART PARTS DESCRIPTION 108101 Handle, Pump 950315 Remote Float Switch 950307 Remote Float Switch 902516 Screw, Tapping #10-24 x 1/2” 927027 Clamp, Cord 915907 Bolt, Hex Head 921103 Washer, Lock 111415 Volute, 2” Discharge 111540 Volute, 3” Discharge 950905 Ty-Rap (not shown) TROUBLESHOOTING INFORMATION PROBLEM...
- Page 6 RETURNED OR REPLACED COMPONENTS: Any item to be replaced under Little Giant #9S, #10S, #14S, and #16S Series Submersible Sewage Ejector the Warranty must be returned to LITTLE GIANT at Oklahoma City, OK or such Pumps are recommended for use in sumps, basins or lift stations and suitable other place as LITTLE GIANT may designate, freight prepaid.
Need help?
Do you have a question about the Eliminator Series and is the answer not in the manual?
Questions and answers