Advertisement
Quick Links
Scroll Controllers
Wired Remote
To begin using your wired remote
simply plug it into the headphone
socket of your device. The up and
A
down arrows
((A)
B
or decrease scrolling speed. Press
the green play button to begin
scrolling, and the red stop button
to stop your script.
The controller is supplied with an
extension cable giving you a
length of 8 meters.
Wireless IR Remote
If you have a wireless remote you
will need to install the sensor onto
your device.
See the Sensor Installation section
for instructions on how to do so.
Ensure to set the controller setting
in your software to Wireless V2. The
maximum range of the wireless
remote is 10 meters or 30ft.
To increase or decrease the
scrolling speed with the
wireless remote, use the plus
and minus buttons and the
Play/Pause button to start and
stop your script.
Sensor Installation
and (B)) increase
Fix the sensor to the unit using the Velcro strips
supplied and plug it into the headphone socket.
i-Prompt
App & Controllers
iPad Lite and Portable
iPhone Prompter
autocue.com
Guide
Advertisement
Related Manuals for AUTOCUE i-Promt
Summary of Contents for AUTOCUE i-Promt
- Page 1 10 meters or 30ft. iPhone Prompter To increase or decrease the scrolling speed with the wireless remote, use the plus and minus buttons and the Play/Pause button to start and stop your script. autocue.com...
- Page 2 Setup Inserting a Script Other Settings Auto Start - This setting will start the script scrolling as soon as it is opened. Navigate to the prompting settings menu. If you are using your iPod/iPhone in conjunction with a Start Delay - Set a delay before the script teleprompter, set the mirrored display to ‘Yes’.
Need help?
Do you have a question about the i-Promt and is the answer not in the manual?
Questions and answers