FIT RUBBER SEAL
FIT RUBBER SEAL
BEFORE FIRST USE!
BEFORE FIRST USE!
CRUSHING HAZARD:
The following action during assembly, disassembly, and
transportation of the seascooter may incur crushing hazards
to your fingers or toes:
-Closing the nose cone latches
-Putting on the nose cone housing
-Placing the battery into the seascooter
-Accidental dropping of the seascooter or battery.
STEP 1
1. Unlock four latches and remove Nose Cone.
Fig.2a
6
STEP 2
STEP 3
Vent O Ring
O-ring Seals
2. Both Rubber seal must be fitted as shown and
fully lubricated with the supplied grease
EVERYTIME before replacing th nose cone.
Fig.2b
Fit two seals in
the grooves.
Fig.2C
Sealing
Surface
Silicone
Grease
7