Yamaha SEASCOOTER 275L User Manual page 7

10. Always set the Master Switch to the OFF position when
it is out of the water. (see fig.6)
Use of variable speed
Your SEASCOOTER™ 275L features three speeds. To
change the speed, pull and the Triggers repeatedly to switch
between low, middle and high speed. See steps 5, 6 and 7
on page 8 and page 9.
Important Notice: This machine is not to use to mix or
to work with sand, concrete and material with similar
physical characteristics. This machine is only to use for
diving in water.
LED battery status indicator
Your SEASCOOTER™ 275L has a LED Battery Status
Indicator (see fig.3), which can be seen through the LED
Window located in the Handle. When the battery is full the
GREEN LED flashes, when the battery is normal the
ORANGE LED flashes, when the battery is low the RED
LED flashes. If the battery is exhausted the LED will be off
and the unit needs to be recharged.
Note: The battery status indicator only functions when the
propeller is turning.
Slide the Master Switch
up to "OFF" position
Fig.6
10
Adjustable Buoyancy
Plug in Ballast Weight to reduce buoyancy or remove to
increase buoyancy. (see fig.7)
Use of Retractable rubber
handle
Your SEASCOOTER™ 275L
comes with an attached
Retractable rubber handle for
easy transport and handling
of the unit.
Simply pull the Retractable
rubber handle up to transport
the unit. (see fig.8)
Simply push the Retractable
rubber handle down prior to
swimming, snorkeling or
diving. (see fig.9)
Note: The Retractable rubber
handle can be removed if
preferred. (see fig.10)
Ballast Weight x 4 pcs
Plug in and click
to hold
Fig.7
Fig.8
Fig.9
Fig.10
11