Advertisement
Hold the Support Plate (12) in the desired location of the wall unit. This plate will be about 2-1/2"
lower than the top of the wall unit. Making sure the Support Plate (12) is level, use a pencil to
mark the anchor locations using the Support Plate (12) screw holes as a guide. We recommend
using a leveler to make sure the Support Plate (12) is oriented correctly.
-Drill two 11/32" holes in these marked spots and tap the Wall Anchors (L) into the drilled holes.
Secure the Support Plate (12) to the Wall Anchors (L) with Screws (F). See Image.
-Mount the completed unit onto the Support Plate (12). The back of the unit has a recessed
area that will hook on to the Support Plate (12). Use a pencil to mark the 2nd set of anchor
locations using the holes in the wall unit as a guide. See Image.
-Remove the wall unit and drill two 11/32" holes at the pencil marks, and tap the Wall Anchors
(L)into the holes.
-Remount the wall unit and secure it to the Wall Anchors (L) with Screws (F). See image.
Advertisement
