Schaller Messtechnik Humimeter BMA User Manual page 4

Measuring procedure
1. Open the drawer of the humimeter BMA
and take out the measuring box. For
that, lift the box and then pull it out.
2.
Completely fill up the measuring box with
the material to measure
must use the delivered bucket.
3. Wipe off the material at the upper edge
of the box evenly.
4. Put the filled measuring box into the
drawer correctly and close it.
5. Select the right product (calibration
curve) using the arrow keys.
6.
Press the
measurement
During the measurement, the LED is
blinking in blue and the display shows the
symbols for an ongoing measurement (see
.
picture)
7.
After the
completed, the
constantly and the measuring values are
shown on the display.
8.
If desired the measuring values can be
saved now. For that, please follow the
instructions on the next page
9. Open the drawer and carefully remove
the measuring box.
10. Empty the measuring box completely.
page 4
. For that you
Start push button.
will start automatically.
measuring procedure
LED is shining in blue
.
The
is
version 2.2