Schaller Messtechnik Humimeter BMA User Manual page 12

Transfer saved data to the PC
(only possible with USB data interface module)
To send your saved logs to the PC, connect
the humimeter device to your PC using the
USB cable that was delivered with your
device. Carefully loosen the protection cap
on your humimeter and plug in the USB
miniB connector. The bigger connector has
to be connected to a USB slot on your PC.
Start the LogMemorizer software on your
PC and switch on your humimeter BMA.
The data transfer can be started on your
humimeter or on the software:
Starting the data transfer on the humimeter:
Press the key until you reach the menu
(see image on the right). Then choose
„Send Logs" and confirm by pressing the
key. Now choose „Manual Logs" and
confirm with again. All saved logs will be
sent to your PC now.
Starting the data transfer on your PC:
Press the button „remote control" in the
LogMemorizer software. A drop-down menu
with several options opens (see image
below).
For transferring the data you can select
„Import last manual log" (the last saved
measuring series is transferred) or „Import
all manual logs" (all saved logs are
transferred).
If you click on one of these menu items, the
transfer starts immediately.
For the basic adjustments of the software
please look through the instructions on the
LogMemorizer USB flash drive.
page 12 version 2.2