Page 1 Pumping Train Group Warranty Power Train Group Safety Main Hydraulic Pump Operation Tanks Main Controls Hydraulic Manifolds Priming Accumulator Introduction Pumping Electrical Group General Safety Clean-up PCL Controls Rules Maintenance Frame Installation Appendix Check-List Available Options Rev * REED LLC 2020...
Page 2 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 INTRODUCTION ......................2 WARRANTY ........................2 WARRANTY CLAIM FORM ........................4 SAFETY .......................... 5 SAFETY ALERT SYMBOLS AND SIGNAL WORDS................. 5 LOCKOUT / TAGOUT ..........................6 GENERAL SAFETY GUIDELINES ......................7 SAFETY DECALS ............................. 8 OPERATION .........................
Page 3 All safety guidelines, product descriptions, illustrations, and specifications found throughout this manual were in effect at the time the manual was released for printing. It should be noted; REED RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR TO MAKE ADDITIONS TO OR IMPROVEMENTS IN THE PRODUCT WITHOUT IMPOSING ANY OBLIGATIONS UPON ITSELF TO INSTALL THEM ON PRODUCTS PREVIOUSLY MANUFACTURED.
Page 4 OPERATION and MAINTENANCE (909)287-2100 WARRANTY REED warrants each new Concrete equipment A,B, and C Series to be free of defects in material and workmanship under normal use and service for a period as follows: CONCRETE PUMP • 1 year or 1200 operating hours, whichever occurs first •...
Page 5 Failure Date: Repair Date: Do not send part(s) until requested by REED or until claim is approved. All parts requested to be returned must have a Return Authorization Number provided by REED and shipping freight prepaid. Parts must ship within 30 days from REED request.
Page 6 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 SAFETY Everyone involved with the operation, maintenance, inspection, and repair of the concrete pump MUST READ and UNDERSTAND this manual and the accompanying Safety Manual. SAFETY ALERT SYMBOLS AND SIGNAL WORDS The following safety alert symbols, signals, and explanations are intended to warn the operator of hazardous and potentially hazardous situations.
Page 7 OPERATION and MAINTENANCE (909)287-2100 LOCKOUT / TAGOUT The Lockout/Tagout procedure applies to all REED concrete placing equipment. Before performing any maintenance and/or repair on equipment; 1. Remove keys lock-out signage must be posted to indicate machine is currently under Lockout/Tagout.
Page 8 Only Operate, Maintain, Inspect, and Repair In Accordance with This Operation Manual and the Safety Manual Performance and Safety Features Must Never Be Altered, Disconnected, or Removed Contact REED Technical Support and Service When Assistance Is Required Rev * 7 of 54...
Page 9 Association (CPMA) for your protection. They are placed at appropriate areas on the concrete pump to be constant warnings of dangers. Know and adhere to the information they provide. Contact REED Customer Service for complimentary replacements of safety decals, shipping charges may apply.
Page 10 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DO NOT OPERATE MACHINE WITHOUT ALL GRATES IN PLACE Rev * 9 of 54...
Page 11 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 10 of 54...
Page 12 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 11 of 54...
Page 13 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DECALS PLACED NEAR HOPPER GRATE AREA Rev * 12 of 54...
Page 14 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 13 of 54...
Page 15 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DECALS PLACED NEAR WATERBOX AREA DECALS PLACED NEAR OUTRIGGER CONTROL AREA Rev * 14 of 54...
Page 16 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 DECALS PLACED ON SIDE PANEL AREA Rev * 15 of 54...
Page 17 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 16 of 54...
Page 18 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 17 of 54...
Page 19 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 OPERATION OPERATOR QUALIFICATIONS Everyone involved with the operation, maintenance, inspection, and repair of the concrete pump MUST READ and UNDERSTAND this operation manual and the accompanying Safety Manual. The following are a few general warnings for operator qualifications outlined in the Safety Manual.
Page 20 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 SERIAL PLATE IDENIFICATION A-SERIES B-SERIES C-SERIES Rev * 19 of 54...
Page 21 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 MAIN PANEL SERIAL IDENIFICATION Rev * 20 of 54...
Page 22 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PRODUCT DESCRIPTION The operation of the concrete equipment encompasses the use of hydraulic and electrical systems. This Concrete Pump is designed to safely mix wet concrete or material within its published ratings and specifications. Stability of the concrete pump during operation is provided by the ( ) outrigger legs and the front jack that can be raised or lowered from the concrete pump, to accommodate terrain.
Page 23 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 CONTROLS PLC MAIN CONTROLS B, C-SERIES EMERGENCY STOP This push/pull emergency switch is used to shut down the pump in an emergency by disabling the hydraulic systems. It does not shut the engine or motor off. Depress PUSH knob in to STOP operation. PULL knob out to REACTIVATE system.
Page 24 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PLC MAIN CONTROLS B,C-SERIES MAIN POWER KEY MAIN DIGITAL DISPLAY this is a three (3) this is where all position key switch. Turnkey to the ON position the pumping statues are displayed. to power control box. Shut down power by turning key to OFF position.
Page 25 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 24 of 54...
Page 26 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 25 of 54...
Page 27 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 26 of 54...
Page 28 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 27 of 54...
Page 29 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 28 of 54...
Page 30 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 29 of 54...
Page 31 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 Rev * 30 of 54...
Page 32 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 GAUGES PUMP or DRIVE CYLINDER GAUGE indicates the hydraulic pressure requirement of the pumping cylinders to push material. Gauge reading varies depending upon many circumstances such as: material slump, material line type, size and length, vertical, uphill, downhill or horizontal placement, pumping speed, etc.
Page 33 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 JOBSITE SET-UP Refer to the Safety Manual for set-up safety precautions not limited to the following guidelines: Ensure Machine Can Be Safely Operated in Set-Up Location Away from Hazards and Dangers Away from Slopes and Excavations Position Machine on As Solid and Level Ground As Possible Adjust height of Machine and remove Leg pins Secure Machine Positions with Leg Pins and Locks...
Page 34 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PREPARING FOR SYSTEM START-UP Everyone involved with the operation, maintenance, inspection, and repair of the concrete pump MUST READ and UNDERSTANDS this manual and the Safety Manual. Refer to the Safety Manual for pumping and blockages safety precautions not limited to the following guidelines: Perform Required Inspection, Lubrication, and Maintenance Before, During, and After Pumping Operations...
Page 35 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 OPERATION OF CONTROLS THE HOPPER GRATE MUST BE CLOSED (There is a safety interlock that guards against the opening of the mixer grate. SYSTEM START-UP Turn Pump ON Only When Hopper Is Full of Concrete Ensure the following conditions are met before activating pump: o PUMP Switch Is “OFF”...
Page 36 Engine Manufacturer Maintenance Schedule Must Be Followed Read Engine Manufacturer Manual REED has provided only general guidelines regarding engine maintenance and will not cover engine warranty claims. Rev * 35 of 54...
Page 37 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 MAINTENANCE Hydraulic Pressure in All Systems Must Be ZERO Before and During Any Maintenance Procedures Engine Must Be Turned OFF and Lockout / Tagout Procedures Must Be Followed Before and During Any Maintenance Procedures Rev * 36 of 54...
Page 38 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 GENERAL MAINTENANCE AREAS Perform scheduled inspections to identify and detect any potential problems. The list presented should be inspected and checked on a regular basis and is a recommended minimum. MAIN CONTROLS • Control box in good condition, sealed, not damaged •...
Page 39 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 LUBRICATION Rapid wear and possible shutdown will result if the unit is operated with inadequate lubrication. Follow the recommendations stated herein, and if needed increase the application of lubricants above these recommendations when the equipment is subject to heavy usage.
Page 40 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 LUBRICATION POINTS The following graphics are for REFERENCE ONLY. IF EQUIPPED WITH DUAL (2) HYDRAULIC SHIFT CYLINDERS, RELIEVE SHIFT CIRCUIT HYDRAULIC PRESSURE TO PROPERLY GREASE HYDRAULIC SHIFT CYLINDERS AND BELL CRANK LUBRICATION POINTS Rev * 39 of 54...
Page 41 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 LUBRICATION POINTS S-TUBE OUTLET GREASE POINTS AGITATOR GREASE POINTS HYDRAULIC MOTOR SIDE GREASE POINTS BEARING SIDE GREASE POINTS Rev * 40 of 54...
Page 42 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 HYDRAULIC SYSTEM Hydraulic pumps are used to supply the flow of oil necessary to operate actuators of the concrete pump. Contamination of the Oil Is the Leading Contributor to System Malfunctions Extreme care must be exercised to prevent contaminants from entering the system. Always cap or plug open ports and hydraulic lines.
Page 43 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 HYDRAULIC SYSTEM MAINTENANCE ITEM DESCRIPTIONS FLUID Check fluid level and oil clarity daily with sight gauge provided. Maintain level at full mark. Add hydraulic oil through the return filter fill port when necessary. TANK BREATHER Clean every 50 hours of operation.
Page 44 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 ADDING HYDRAULIC FLUID There are a few common methods for filling the hydraulic tank as described below. Exercise extreme care when adding fluid to the hydraulic tank to avoid contamination. • To prevent any dirt or water from entering the hydraulic tank, thoroughly clean area around the return filter fill port plug, the vented fill cap or the inspection cover.
Page 45 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 FILL PORT FILTER ELEMENT GASKET RETURN FILTER Do Not Use Cloth for Straining Fluid Lint Is a Contaminant Harmful to the Hydraulic System FILTER ELEMENT O-RING Rev * 44 of 54...
Page 46 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 To change the filter elements: 1. Shut off machine. 2. VERIFY PRESSURES IN ALL CIRCUITS READ ZERO! 3. Wipe clean any dirt and grime from area surrounding filter housing 4. Loosen the filter cover plate bolts 5.
Page 47 COMPONENT REPLACEMENT When parts are worn, do not delay in replacement. Continued usage with worn parts may lead to damage of other components. Please contact the REED Service Department or your local dealer for technical support. Rev * 46 of 54...
Page 48 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 PUMP MAINTENANCE SCHEDULE AND CHECKLISTS Providing a maintenance schedule defined specifically by run hours or yardage pumped serves only as a general guideline given the large amount of variables a unit might be subject to, such as weather and ambient temperature conditions, jobsite conditions, material differences of mix design, the load burden the unit is typically subject to, i.e.
Page 49 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 INITIAL 50 HOUR MAINTENANCE CHECKLIST Actual Hours Date # Maintenance Description Initials Change engine oil and filters (see engine manufacturer maintenance schedule for additional requirements) IF REQUIRED Additional Notes: Change hydraulic oil filters Inspect hydraulic hoses and fittings for any signs of external wear or damage Additional Notes: Rev * 48 of 54...
Page 50 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 100 HOUR MAINTENANCE CHECKLIST Actual Hours Date Maintenance Description Initials Clean hydraulic tank breather Inspect all structural components (check frame, hopper, and other structural members for any damage) Additional Notes: Additional Notes: Check coolers and radiators for dirt or debris. Clean as necessary Check condition of engine drive belts.
Page 51 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 250 HOUR MAINTENANCE CHECKLIST Actual Hours Date # Maintenance Description Initials Change hydraulic filters (or change more frequently as indicated by indicator gauge on filter) Additional Notes: Check that all electrical wires, cables, terminals, plugs are in good condition Additional Notes: Change engine oil and filters (see engine manufacturer guide for all engine requirements) IF REQUIRED...
Page 52 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 250 HOUR MAINTENANCE CHECKLIST Actual Hours Date Maintenance Description Initials Control console in good condition Switch in good condition Additional Notes: Rev * 51 of 54...
Page 53 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 500 HOUR MAINTENANCE CHECKLIST Actual Hours Date Maintenance Description Initials Inspect hydraulic hoses and fittings for any signs of external wear or damage Additional Notes: Inspect all wear parts and change as necessary (excessive wear may cause inefficient performance and/or shutdown of operation) Additional Notes: Change hydraulic fluid, clean the reservoir and the suction strainers within...
Page 54 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 EVERY 500 HOUR MAINTENANCE CHECKLIST Actual Hours Date ADDITIONAL GENERAL NOTES: Rev * 53 of 54...
Page 55 www.reedpumps.com OPERATION and MAINTENANCE (909)287-2100 NOTES Rev * 54 of 54...
Page 93 DEUTSCH 128 PLUG TIER 4 PIN FROM DESCRIPTION WIRE SIZE/COLOR FROM DESCRIPTION WIRE SIZE/COLOR MVEC MAIN PWR V+ (BATTERY) RED 14 AWG 65 BUSS#17-3 VOLUME + B- WHT 18/19 AWG MVEC MAIN PWR V+ (BATTERY) RED 14 AWG 66 BUSS#17-4 VOLUME - B- WHT 18/19 AWG MVEC MAIN PWR...
Page 94 BUSS 3 BUSS 8 BUSS 5 BUSS 4 BUSS 1 BUSS 2...
Page 97 HYDRAULIC / ELECTRICAL SCHEMATICS...
Page 101 TRAILER HARNESS...
Page 102 89113 PLC WIRING HARNESS PIN-OUT FROM DESCRIPTION WIRE SIZE/COLOR FROM DESCRIPTION WIRE SIZE/COLOR MVEC MAIN PWR V+ (BATTERY) RED 14 AWG 65 BUSS#17-3 VOLUME + B- WHT 18/19 AWG MVEC MAIN PWR V+ (BATTERY) RED 14 AWG 66 BUSS#17-4 VOLUME - B- WHT 18/19 AWG MVEC MAIN PWR V+ (BATTERY)
Page 109 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 PARTS............................3 PUMPING TRAIN GROUP ......................3 S-TUBE ........................... 5 4” OUTLET ASSEMBLY ..................5 4” OUTLET SEAL KIT INSTALLATION ..............5 WEAR PLATE ASSEMBLY ................... 7 4” PISTON CUP ASSEMBLY ................... 8 ..........................8 DRIVE CYLINDER ASSEMBLY ..................9 DUAL SHIFT BELL CRANK ASSEMBLY ............
Page 110 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 PLC CONTROLS ........................55 B-SERIES CONTROL PANEL ................55 KEY PAD SWITCHES INSERT KIT ............56 MVEC/FUSE/RELAY ................58 ESTOP, KEY ASSEMBLY, PLUGS ............62 BUSSES, CONNECTORS, PINS ............. 63 SERIAL PLATE IDENTICATION ................. 64 BUSS BAR SET-UP .................... 65 CAN PUSH BUTTON SWITCH PLUG ..............
Page 111 DETAIL B ID # PART # PART DESCRIPTION QUANTITY 87894-8 DUAL SHIFT PUMPING TRAIN ASSEMBLY 87893 HOPPER WELD MOD-B20HP STD DUAL 71349 S TUBE WLD, 4X4 88172 FLUSH BOX WELDMENT, B20/B20HP 88180 BKT-PROX SENSOR, FLUSH BOX 88179 BRACKET PROXIMITY SWITCH MOUNT 10282 PLUGS-PIPE GALV 1”...
Page 112 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 PUMPING TRAIN ASSEMBLY CONTINUED DETAIL E (OPTION) DETAIL G DETAIL D 150 FT-LB DETAIL F ID # PART # PART DESCRIPTION QUANTITY 703601 TIE ROD 71232 CONCRETE CYLINDER, 4” X 36” ELBOW, MB – MJ-16-16 85688 TUBE, HYD, LOOP LINE 71401 END PLATE –...
Page 113 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 S-TUBE 4” OUTLET ASSEMBLY DETAIL A VIEW A ID # PART # PART DESCRIPTION QUANTITY HHCS, 9/16-12 X 2 1/2 GR/8 LOCK NUT, 9/16 -12 GREASE FITTING, 1/8” NPT 90° 86335 OUTLET SEAL HOUSING- 4” 71343 CHROMED OUTLET HHCS, 3/8 –...
Page 114 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 4” OUTLET SEAL KIT INSTALLATION VIEW A ID # PART # PART DESCRIPTION QUANTITY 86621 SEAL KIT 86369 O-RING-#158 BUNA 90 86370 O-RING-#163 BUNA 90 86614 SEAL-MODIFIED- 4 IN OUTLET 86371 GUIDE BAND - 4.75 OD X 1.00W 86372 LIP SEAL -4.50 ID X 4.88 OD X.38 6 of 87...
Page 115 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 WEAR PLATE ASSEMBLY DETAIL B CONCRETE CYLINDER S TUBE ID # PART # PART DESCRIPTION QUANTITY 71249 O-RING, #347 BUENA 70 HHCS, ¾ - 10X 2½” GR 8 LOCK WASHER, ¾” 72384 WEAR RING, 4” DOUBLE LIP, 26% CHROME 71251 WEAR PLATE-CAST 4”...
Page 116 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 4” PISTON CUP ASSEMBLY DETAIL C 6, 7 ID # PART # PART DESCRIPTION QUANTITY 70077 PISTON COUPLING, 87940 PISTON ADAPTER 4" WITH GUIDE BAND 87994 WEAR RING (GUIDE BAND) 4" 76500 PISTON CUP, 4 IN 88011 PISTON PLATE 4”...
Page 117 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DRIVE CYLINDER ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 86304-2 HYD CYLINDER GROUP 78961 CHECK VALVE-5K PSI O-RING 86748 FITTING-MB-MJ90-6-6 ELBOW, MB-MB90-6-6 86223HT HYDRAULIC CYLINDER 3.50 X 2.00 X 35.75 86222A-SK SEAL KIT 85659-002 HOSE, 4M2T-6FJX90S-6FJX90S-11.25 EA/SIDE 9 of 87 B20HPC-V26...
Page 118 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DUAL SHIFT BELL CRANK ASSEMBLY DETAIL E ID # PART # PART DESCRIPTION QUANTITY 85604 BELL CRANK, B10R, 2 CYLINDERS 86502 LOCATOR RING- FLANGE BEARING 70124 FLANGED BEARING 70125 SPACER, S-TUBE NUT HHCS, 5/8”-18X5 ½”” GR 8 LOCK WASHER, 5/8”...
Page 119 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DUAL SHIFT CYLINDER ASSEMBLY DETAIL E ID # PART # PART DESCRIPTION QUANTITY 74207 PIN - CLEVIS - .750 DIA 71011 BUSHING - SHIFT CYLINDER 86221-1HT SWING CYLINDER 2.50 X 1.00 X 5.00 86221A-SK SEAL KIT COTTER PIN, 3/32X1 ¾”...
Page 120 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DUAL SHIFT ASSEMBLY DETAIL E SPACE AS REQUIRED FOR PROPER S-TUBE 4 or 5 ALIGNMENT SPACE AS REQUIRED FOR PROPER S-TUBE 4 or 5 ALIGNMENT ID # PART # PART DESCRIPTION QUANTITY 86220HT SWING RAM – 2.5 X 5.75 STROKE 86441 RETAINER, SWING RAM 76798-1...
Page 121 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 HOPPER AGITATOR ASSEMBLY (OPTION 1) VIEW F DETAIL F PART # PART DESCRIPTION QUANTITY 88041-A1 AGITATOR ASSEMBLY HHCS, ½ -13X2 ¼” GR 8 LOCK NUT, ½” -13 ¼-28X3/4” LOCK WASHER, ¼” GREASE FITTING, 1/8” NPT 90° 85923 SHAFT,AGITATOR HHCS, ½...
Page 122 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 AGITATOR ASSEMBLY (OPTION 2) DETAIL F DETAIL F 85761 AGITATOR ASSEMBLY HHCS, ½ -13X2 ¼” GR 8 LOCK NUT, ½” -13 ¼-28X3/4” LOCK WASHER, ¼” GREASE FITTING, 1/8” NPT 90° 85923 SHAFT, AGITATOR HHCS, ½ -20X1 ½” GR 8 LOCK WASHER, ½”...
Page 123 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DETAIL G NOTE* Install Grove as shown DETAIL G ID # PART # PART DESCRIPTION QUANTITY GREASE FITTING, 1/8” NPT STRAIT 70219 REMIX SHAFT BUSHING 77877 SPACER, REMIX 86824 FLAT WASHER, ¾” SAE 70214 IDLER SHAFT, AGITATOR 70210 IDLER BREARING HOUSING 80030...
Page 124 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 SAFETY GRATE ID # PART # PART DESCRIPTION QUANTITY 87369 PROXIMITY SENSOR PNP HOPPER GRATE 801902-006 CLAMP,18MM TUBE CLAMP SET 87997 COVER WELD PROX SWITCH HOPPER 16 of 87 B20HPC-V26 Rev A...
Page 125 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 GRATE ASSEMBLY 3/8-16-X 1 1/4” HEX BOLT 4EA. 3/8 FLAT WASHER 8EA. 3/8-16 LOCK NUT 4EA. 3/8-16-X 1 1/4” HEX BOLT 4EA. 3/8 FLAT WASHER 8EA. 3/8-16 LOCK NUT 4EA. ID # PART # PART DESCRIPTION QUANTITY 87892 GRATE WELDMENT, STD HOPPER...
Page 126 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 CLEAN OUT-DOOR ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 86988 DOOR WELDMENT CLEAN OUT 86559 BLOCK CLEAN OUT DOOR, LH 86560 BLOCK CLEAN OUT DOOR, RH 86922 SHOULDER SCREW 1" DIA-1 1/4" W102908A O-RING CORD, HOPPER DOOR 2.21 SHCS ½”-13 X 1 ¼”...
Page 127 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 POWER TRAIN GROUP ENGINE TIER-4 ID # PART # PART DESCRIPTION QUANTITY 89660 POWER TRAIN ASSY B20HP 130 CUM/KAW 88876 ENGINE QSB4.5 130 HP CUMMINS TIER-4 19 of 87 B20HPC-V26 Rev A...
Page 128 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 MAIN HYDRAULIC PUMP GEAR PUMP/PUMP DRIVE K3VL112 ID # PART # PART DESCRIPTION QUANTITY 85124-004 PUMP, KV3L112 KAWASAKI, 75HP 87360 PUMP DRIVE -SAE 3 – SAE,D 87153-001 PUMP-RH-DBLE GEAR, 11. 3/8.2 CC BOSCH 88174 O-RING 20 of 87 B20HPC-V26 Rev A...
Page 129 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 HOSE KIT 85659-002 85660-009 85657-004 85657-005 85667-007 85657-002 ID # PART # PART DESCRIPTION QUANTITY 89663 HOSE KIT 85659-002 HOSE, 4M2T-6FJX90S-6FJX90S-11.25 85660-009 HOSE, 40G4H-NO ENDS-27.50 85657-004 HOSE, 8M2T-10FJX-10FJX45-33.00 85657-005 HOSE, 8M2T-10FJX-10FJX90S-28.00 85667-007 HOSE, 12G5K-12FJX-12FJX90-42.50 85657-002 HOSE, 8M2T-10FJX-10FJX90S-19.50 21 of 87 B20HPC-V26 Rev A...
Page 130 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 HOSE KIT 85657-002 88138-006 89632-H1 85657-033 85666-001 85666-025 85666-026 ID # PART # PART DESCRIPTION QUANTITY 89663 HOSE KIT 88138-006 HOSE, 16M1T-16FJX-16FJX90-94.0" 89632-H1 PSGB132 X IN118 FLB FLB90 V180N 85657-033 HOSE, 8M2T-10FJX-10FJX-24.00 85666-001 HOSE, 16C13-16FJX-16FJX-30.00 85666-025 HOSE, 16G5K-16FJX-16FJX-60.00 85666-026 HOSE, 16G5K-16FJX-16FJX-69.00...
Page 131 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 HOSE KIT 85666-027 85657-048 85663-021 85659-023 ID # PART # PART DESCRIPTION QUANTITY 89663 HOSE KIT 85666-027 HOSE, 16G5K-16FJX-16FJX90S-55.0 85657-048 HOSE, 8M2T-10FJX-10FJX45S-39.00 85663-021 HOSE, 20G4H-20FJX-20FJX-30.00 85659-023 HOSE, 4M2T-6FJX-6FJX90S-27.00 23 of 87 B20HPC-V26 Rev A...
Page 132 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 EXHAUST AFTERTREATMENT TIER-4 ID # PART # PART DESCRIPTION QUANTITY BRACKET 4 CYL CUMMINS EXHAUST 74679 PLUG 1/4" NPT SOCKET HEAD 89348 HEAT BLANKET 89424 T4 ROOF HARNESS SUPPORT, C-SERIES W-114850 RUBBER BUFFER, 65X22.5X26 89638-1 ROUND SPRING ST. WIRE PROTECTIVE 60MM 2.75 77597 RAIN CAP-4”...
Page 133 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89267 DEF COOLANT GROUP 88794-DT DEF TANK 89346 HOLD DOWN STRAP, 1” 88794-022 VALVE, DEF TANK HEATER 25 of 87 B20HPC-V26 Rev A...
Page 134 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DEF COOLANT GROUP ID # PART # PART DESCRIPTION QUANTITY 88794-CCV VALVE, COOLANT CONTROL, 11EA2V 89268 COOLANT MANIFOLD 89268-B MANIFOLD BRACKET 89269 BRASS FITTING, ½” NPT TO 5/8” QC 89269-1 QUICK CONNECT FITTING, 5/8” 89269-2 QUICK CONNECT FITTING, 5/8” ELBOW 89269-C STEPLESS HOSECLAMP, 5/8”...
Page 135 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DEF COOLANT GROUP ID # PART # PART DESCRIPTION QUANTITY DEF PUMP FILTER, DEF PUMP 88794-001 DEF HOSE, SUCTION (YELL) 88794-002 DEF HOSE, RETURN LINE (RED) 88794-003 DEF HOSE, PRESSURE LINE (WHT) 73748 BUMPER 27 of 87 B20HPC-V26 Rev A...
Page 136 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DEF SPARE PARTS ID # PART # PART DESCRIPTION QUANTITY SPARE PARTS 88794-007 AFTERTREATMENT SENSOR, NOx INLET 88794-008 AFTERTREATMENT SENSOR, NOx OUTLET 28 of 87 B20HPC-V26 Rev A...
Page 137 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 TANKS FUEL TANK ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89484 FUEL TANK ASSY B-SERIES TIER-4 89479 FUEL TANK WELDMENT, B-SERIES TIER-4 85570 FUEL CAP, 1 1/2 IN VENTED 87545 FITTING BARBED-MPT, HOSE 3/8-1/2 MPT 87770 FITTING BARBED 3/8 TUBE- ½”...
Page 138 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 FUEL TANK ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 10297 PLUG-GALV 1/2" (AS NEEDED) 87566 FITTING BARBED-JIC, 3/8-3/8MPT (STRAIGHT) 87567 FITTING (90 DEG) METRIC TO JIC 30 of 87 B20HPC-V26 Rev A...
Page 139 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 HYDRAULIC TANK ASSEMBLY MAGNETIC SEPARATOR INSIDE TANK ID # PART # PART DESCRIPTION QUANTITY 89199 HYD TANK ASSY B-SERIES TIER-4 89195 HYDRAULIC TANK WELDMENT, B-SERIES T4 85529 ENDCOVER KIT, 12 IN W/DRAIN 85867 GASKET- END COVER 12” 85282 FILTER, RETURN, TANK MOUNTED BW10241...
Page 140 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 HYDRAULIC TANK ASSEMBLY CONTINUED ID # PART # PART DESCRIPTION QUANTITY 74509 GAUGE-SIGHT/TEMPERATURE 801025 DRAIN COCK, 1/4 NPT 87154 SOLENOID VALVE ASSY (REMIX-DUMP) 87155 COIL 87155-C CARTRIDGE 32 of 87 B20HPC-V26 Rev A...
Page 141 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 MANIFOLDS DRIVE CYLINDER CIRCUIT MANIFOLD ASSEMBLY TORQUE ½ -13 X 2 ½” SHCS 80 FT-LBS 6 PLACES ½ -13 X 4” SHCS TORQUE 75 FT-LBS 4 PLACES TORQUE 35-40 FT-LBS TORQUE 350-375 FT-LBS TORQUE 35-40 FT-LBS O-RING ID # PART #...
Page 142 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DRIVE CYLINDER CIRCUIT MANIFOLD ASSEMBLY CONT. DRIVE CYLINDER VALVE DRIVE CYLINDER ASSEMBLY COMPLETE PILOT SOLENOID VALVE 85689 DRIVE CYLINDER MAIN VALVE DRIVE CYLINDER PILOT SOLENOID VALVE ASSEMBLY 85691 O-RING KIT 72313 COIL 85692 DRIVE CYLINDER MAIN SOLENOID VALVE ASSEMBLY 85690 O-RING KIT...
Page 143 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 S-TUBE CIRCUIT MANIFOLD ASSEMBLY SHCS ½”-13 X 2 ½” TORQUE 70 FT-LBS 6 PLACE TORQUE 30-35 FT-LBS TORQUE 45-50 FT-LBS SHCS ½ -13 X 4” O-RING TORQUE 75 FT-LBS 4 PLACES TORQUE 15-20 FT-LBS TORQUE 20-25 FT-LBS ID # PART # PART DESCRIPTION...
Page 144 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 S-TUBE CIRCUIT MANIFOLD ASSEMBLY CONT. S-TUBE PILOT SWING TUBE VALVE SOLENOID ASSEMBLY COMPLETE VALVE 85693 S-TUBE MAIN VALVE S-TUBE PILOT SOLENOID VALVE ASSEMBLY 85695 O-RING KIT 72313 COIL 85692 S-TUBE MAIN SOLENOID ASSEMBLY 85694 O-RING KIT 74994 36 of 87 B20HPC-V26...
Page 145 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ACCUMULATOR ASSEMBLY FRAME RAIL ID # PART # PART DESCRIPTION QUANTITY 71360 ACCUMULATOR 73171 ACCUMULATOR BKT.W/CLOSING HARDWARE 801028 GROMMET, ACCUMULATOR 86728-019 ELBOW, MB-MJ90-12-12 37 of 87 B20HPC-V26 Rev A...
Page 146 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ELECTRICAL GROUP PROXIMITY SWITCHES ID # PART # PART DESCRIPTION QUANTITY 89342 ELECTRICAL GROUP B-SERIES, PLC TIER-3 CUMM 77998 PROXIMITY SENSOR NPN FLUSH BOX MOUT 10522 STRAIN RELIEF 30240 GASKET LIQUID TITE ½” -ELECT 10528 NUT-1/2" BONDING TYPE LOCK 77990 CABLE, PROXIMITY SWITCH, 5M 38 of 87...
Page 147 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 TEMPERTURE SENSOR ID # PART # PART DESCRIPTION QUANTITY 89279 SENSOR TEMPERTURE FOR TIER4 CUMMINS 89633 ADAPTER TEMP SENSOR FOR 89279 39 of 87 B20HPC-V26 Rev A...
Page 148 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 BATTERY ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89477-T4 ELECTRICAL GROUP B-SERIES, PLC TIER-4 CUMM 77075 BATTERY-12V 1000 CCA31 89524-P CABLE,46” BATTERY RED 4/0 89524-N CABLE, 44” BATTERY BLACK 4/0 87221 RED LEFT ELBOW TERM PROTECTOR 87222 INSULATOR LEFT ELBOW-BLACK 89511-N...
Page 149 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 TRAILER HARNESS AND BREAKAWAY ALTERNATOR ID # PART # PART DESCRIPTION QUANTITY 77705 BREAK-AWAY KIT 86532 TRAILER HARNESS- C-SERIES 86579 TRAILER PLUG 7C FLAT PI 72949 GROMMET 72813 GROMMET 41 of 87 B20HPC-V26 Rev A...
Page 150 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 TRAILER LIGHTS UNDERSIDE ID # PART # PART DESCRIPTION QUANTITY 72948 TAIL LIGHT R3000 SER. 87665 LOOM CLAMP 7/8" 72949 GROMMET 42 of 87 B20HPC-V26 Rev A...
Page 151 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 TIER-4 MAIN WIRING HARNESS 43 of 87 B20HPC-V26 Rev A...
Page 152 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 TIER-4 ROOF HARNESS 44 of 87 B20HPC-V26 Rev A...
Page 153 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89052 WIRING HARNESS, B SERIES PLC TIER 4 87540 CABLE SOLENOID 88243 CABLE WITH 2 DIN PLUGS 5M 87540-1 CABLE SOL VALVE, W/DIN PLUG 77990 CABLE, PROXIMITY SWITCH 10522 STRAIN RELIEF 10528 NUT 1/2”...
Page 154 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89156 DEUTSCH RECEPTACLE 128 CONTACT 89116 DEUTSCH WEDGE LOCK FOR 89109 87457 PINS, FOR 87456 BW10147 CONTACT SOCKET SIZE-16, 13 AMP, PIN 89109-B BOOT FOR 89109,89157 ID # PART # PART DESCRIPTION QUANTITY 89313...
Page 155 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89314 PLUG, APEX 150 SERIES, 24 CAVITY ID # PART # PART DESCRIPTION QUANTITY 88935 3 EAY PLUG DT SER 88937 WEDGE LOCK, DT 3 PIN PLUG (BLUE) 88935-B BOOT FOR 3 WAY DT SERIES PLUG 88933-1 CAN TERM RESISTOR 120 OHMS, DT RECEPT...
Page 156 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89316 PLUG. HDSCS SERIES, 4 CAVITY GRAY 89316-3 BACKSHELL, 89315, 89316 ID # PART # PART DESCRIPTION QUANTITY 89315 PLUG. HDSCS SERIES, 4 CAVITY BLK 89315-3 BACKSHELL, 89315, 89316 48 of 87 B20HPC-V26 Rev A...
Page 157 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89102 DEUTSCH DT06 PLUG, 2X2 89132 WEDGE, DEUTSCH FOR 89102 89102-B BOOT FOR 89102, 4 CAVITY SOCKET ID # PART # PART DESCRIPTION QUANTITY 89318 PLUG, METRIPAK 150 SERIES, 3 CAVITY 49 of 87 B20HPC-V26 Rev A...
Page 158 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89319 RECEPTICAL, METRIPAK 150 SERIES, 6 CAVITY 89319-3 WEDGE LOCK, METRIPAK 150 CAV, FOR 89319 ID # PART # PART DESCRIPTION QUANTITY 89320 PLUG, HDSCS SERIES, 12 CAVITY, BLACK 89320-3 BACKSHELL FOR 89320 50 of 87...
Page 159 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89321 PLUG, AMP SERIES, 4 CAVITY 89321-3 COVER FOR 89321 ID # PART # PART DESCRIPTION QUANTITY 89322 PLUG, BOSCH, 2 CAVITY 51 of 87 B20HPC-V26 Rev A...
Page 160 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89323 PLUG, METIPAK 150.2 SERIES, 2 CAVITY 89323-1 TERMINAL, 150 SERIES, 16-18 AWG FOR 89323 ID # PART # PART DESCRIPTION QUANTITY 89277 DEUTSCH DT06 PLUG, 2 CAVITY 89277-1 WEDGE FOR 89277 52 of 87 B20HPC-V26...
Page 161 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 87456 PLUG SOCKET CONNECTOR, 8PIN ID # PART # PART DESCRIPTION QUANTITY 89217 DEUTSCH HD34 RECP, 8 PIN 88479 NUT FOR 88478 RECEPTICAL 88480 WASHER FOR 88478 RECEPTICAL 53 of 87 B20HPC-V26 Rev A...
Page 162 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ID # PART # PART DESCRIPTION QUANTITY 89277 DEUTSH DT706 PLUG, 2 CAVITY 89277-A WEDGE FOR 89277 ID # PART # PART DESCRIPTION QUANTITY 88733-1 FUSE HOLDER INLINE, BLADE STYLE, 30AMP 90394 FUSE, ATO 30AMP 54 of 87 B20HPC-V26 Rev A...
Page 163 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 PLC CONTROLS B-SERIES CONTROL PANEL ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89477-T4 ELECTRICAL GROUP B SER PLC TIER-4 CUMMINS 89333-T4 B-SERIES CONTROL PANEL ASSY PLC TIER-4 89090 EMERGENCY STOP PUSH BUTTON HEAVY DUTY 89090-L ILLUMINATED E-STOP RING 88979-3 KEYPAD 2X4 SWITCH, PROGRAMABLE...
Page 164 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 KEY PAD SWITCHES INSERT KIT ID # PART # PART DESCRIPTION QUANTITY 89412-BC INSERT KIT FOR PLC SWITCH FUNCTIONS INSERT, REMOTE ICON (CLEAR) 89412-2L INSERT, PRESSURE A/B ICON (CLEAR) 89412-4L INSERT, PUMP ON ICON (CLEAR) 89412-5L INSERT, PUMP FORWARD ICON (CLEAR) 89412-7L INSERT, PUMP LOCAL ICON (CLEAR)
Page 165 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 KEY PAD SWITCHES INSERT KIT CONT. ID # PART # PART DESCRIPTION QUANTITY INSERT, THROTTLE GAIN ICON (CLEAR) 89412-9S INSERT, TROTTLE DROP ICON (CLEAR) 89412-10S INSERT, PUMP VOLUME (-) (CLEAR) 89412-12S INSERT, PUMP VOLUME (+) (CLEAR) 89412-11S INSERT, FASTCHANGE ON ICON (CLEAR) 89412-13S...
Page 166 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 MVEC/FUSE/RELAY MVEC 3 MVEC 1 MVEC 2 ID # PART # PART DESCRIPTION QUANTITY MVEC, 12 RELAY, BUSSMAN 88980 AUTOMOTIVE MINITURE BLADE FUSE 10AMP 88953 MVEC, RELAY,12V 89128 AMP, PLUG 2X6, (MVEC 3) 89112 AMP, WEDGE, 89112 (MVEC 3) 89112-1 AMP, FEMALE, PIN, TERMINAL (MVEC 3) 89112-2...
Page 167 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 MVEC/FUSE/RELAY BUSS#3 (R1,R4) BUSS#1 HORN (R2,R5) (R7) VIB (R8) HORN (R3) VIB (R6) 89128 59 of 87 B20HPC-V26 Rev A...
Page 168 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 EXPANSION MODULE PARKER IQAN-XC10 ID # PART # PART DESCRIPTION QUANTITY 88919 XC10, PARKER EXPANTION MODULE 88945 AMP, 35 POS SEAL PLUG, BLACK (C1) 88946 AMP, 35 POS SEAL PLUG, WHITE (C2) 88945-S AMP, CONTACT PIN (C1, C2) 89090-C DC/DC CONVERTER 12VDC TO 24VDC 60 of 87...
Page 169 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 MD3 DISPLAY MODULE FRONT BACK ID # PART # PART DESCRIPTION QUANTITY 88918 MD3, PARKER DISPLAY 88653 PLUG DTM 12 WAY A KEY, GREY (C1) 88653-2 WEDGELOCK DTM 12 WAY PLUG (C1) 88959 CONTACT SOCKET SIZE 20 (7.5 AMP) (C1) ADDRESS 3 IDTAG WITH DEUTSCH TERMINALS (1K 89136 OHM)
Page 170 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 ESTOP, KEY ASSEMBLY, PLUGS ESTOP ASSEMBLY KEY ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89090 EMERGENCY STOP BUTTON HEAVY DUTY 89090-L ILLUMINATED E-STOP RING 89004 KEY SWITCH SEALED 89107 DEUSCH DT06, 1X6 89108 DEUTSCH WEDGE LOCK FOR 89107 BW10147 DEUTSCH CONTACT SOCKET, 16AWG 62 of 87...
Page 171 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 BUSSES, CONNECTORS, PINS BUSS-2 BUSS-7 BUSS-16 BUSS-1 BUSS-14 BUSS-15 BUSS-10 BUSS-11 BUSS-12 BUSS-13 BUSS-3 BUSS-4 BUSS-5 BUSS-8 ID # PART # PART DESCRIPTION QUANTITY 89180 DEUTSCH DT04 BUS, 1X8 (SOLID) DEUTSCH DT04 BUS, 2X4 (SPLIT) 89181 89106 DEUTSCH DT04 BUS, 1X12 (SOLID) 89103...
Page 172 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 SERIAL PLATE IDENTICATION Serial Plate Identification Tier version Panel serial # Display serial # Pump type Expansion module serial # PLC program Fuse/Relay box serial # ID # PART # PART DESCRIPTION QUANTITY 89223 DEUTSCH HD10 PLUG FALANGED 6 PIN 89223-C DUST CAP FOR 89223 89402...
Page 173 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 BUSS BAR SET-UP 65 of 87 B20HPC-V26 Rev A...
Page 174 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 CAN PUSH BUTTON SWITCH PLUG SWITCH A CAN SWITCH A ID # PART # PART DESCRIPTION QUANTITY 89102 DEUTSCH DT04 PLUG, 2X2 89132 DEUTSCH WEDGE LOCK FOR 89102 BW10147 CONTACT PIN 16 AWG (FEMALE) 89146 DEUTSCH DT04 PLUG, 2X4 89209 DEUTSCH WEDGE LOCK FOR 89146 88958...
Page 175 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 CAN PUSH BUTTON SWITCH PLUG SWITCH B CAN SWITCH B ID # PART # PART DESCRIPTION QUANTITY 89102 DEUTSCH DT04 PLUG, 2X2 DEUTSCH WEDGE LOCK 89132 FOR 89102 CONTACT PIN 16 AWG BW10147 (FEMALE) 89146 DEUTSCH DT04 PLUG, 2X4 DEUTSCH WEDGE LOCK 89209 FOR 89146...
Page 176 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 CAN PLUGS, CONNECTORS GREEN BLUE BLUE NOTE* GREEN-CIRCLE BLUE-TRIANGLE BLUE ENGINE CAN J1939 ID # PART # PART DESCRIPTION QUANTITY 88934 3 WAY T RECEPTICAL, DT SER. 88935 3 WAY PLUG DT SER. 88936 WEDGE LOCK FOR 3 WAY PLUG (GREEN) 88937 WEDGE LOCK FOR 3 WAY PLUG (BLUE) BW10147...
Page 177 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DEUTSCH 128 PLUG ASSEMBLY CONTROL HARNESS SIDE ENGINE HARNESS SIDE 69 of 87 B20HPC-V26 Rev A...
Page 178 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 DEUTSCH 128 PLUG ASSEMBLY CONT. PLUG ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89109 DEUTSCH RECEPTACLE 128 CONTACT, PIN 89159 DEUTSCH WEDGE LOCK FOR 89157 88958 CONTACT PIN SIZE 16 AWG, (MALE) 87807 CONTACT PIN SIZE 12 AWG, (MALE) 89158 DEUTSCH RECEPTACLE, FLANGE 89109-B...
Page 179 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 FRAME INSTALLATION FRAME, TIRES, JACK, AND TOW EYE ID # PART # PART DESCRIPTION QUANTITY 89486 FRAME ASSY, DUAL AXLE TIER-4 FINAL 89485 FRAME WELDMENT 36” STOCK TIER-4 85423 TIRE & WHEEL ASSY -215/75R17.5 H 85123 JACK WELDMENT 87037 DRAW BAR...
Page 180 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 7000LB AXLE MOUNTING ASSEMBLY FRONT FRONT AXLE MOUNT ID # PART # PART DESCRIPTION QUANTITY AXLE MOUNTING HARDWARE KIT B20 89030-H ½” -20 X 2.5 HHCS GR8 ½” SAE WASHER ½” USE WASHER ½” SAE WASHER ½”...
Page 181 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 7000LB AXLE MOUNTING ASSEMBLY REAR REAR AXLE MOUNT ID # PART # PART DESCRIPTION QUANTITY AXLE MOUNTING HARDWARE KIT ½” SAE WASHER ½” USE WASHER ½” – 20 LOCK NUT ½” BEVELED WASHER ½” -20 X 4.5 HHCS GR8 89010 AXLE, TORSION, 7000 LB 89012...
Page 182 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 HOOD AND COVERS TOP COVER FLUSH BOX ASSEMBLY ID # PART # PART DESCRIPTION QUANTITY 89482-2 COVER TOP, B SER T4/PLC 130HP CUMMIN 89284 COVER FRONT WELD, B SER CUM TIER-4 87592 COVER FRONT AIR INTAKE, B-SEREIES 87647 GUSSET ENGINE COVER PAINTED 88187...
Page 183 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 FENDERS AND OUTRIGGERS ID # PART # PART DESCRIPTION QUANTITY 85394 FENDER, NON-OPERATOR SIDE, C-SERIES PAINTED 85395 FENDER, OPERATOR SIDE, C-SERIES PAINTED 86553 OUTRIGGER WELDMNT, INNER-PAINTED 86557 OUTERTUBE, O/R B & C - PAINTED 85595 PIN, Q/R, 5/8 DIA X 3 1/2 L 800418 LANYARD, Q/R PIN 85714-1...
Page 184 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 HYDRAULIC OUTRIGGER GROUP ID # PART # PART DESCRIPTION QUANTITY 88041AO HYD OUTRIGGER GROUP (AGIT=OUTRIGGER) 85685 TUBE, HYD, OUTRIGGER - PAINTED 85686 TUBE, HYD, OUTRIGGER - PAINTED 85659-010 HOSE, 4M2T-6FJX-6FJX-33.00 801902-020 TUBE CLAMP – 3/8 IN – HALF MJ-MJ90-6-6 74471 VALVE, MAUNAL-3 SPOOL...
Page 185 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 OPTIONS 3 SPOOL CONTROL VALVE DETAIL A DETAIL B DETAIL D DETAIL C ID # PART # PART DESCRIPTION QUANTITY 85706 RELIEF, CARTRIDGE 74469 DETENT KIT, #11 WALVOIL VALVE 74471-020 VALVE ACTUATOR FOR 74471, 74585, 74584 VALVES 77 of 87 B20HPC-V26 Rev A...
Page 186 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 OPTIONS HYDRAULIC OUTRIGGER GROUP ID # PART # PART DESCRIPTION QUANTITY 86574 HYD CYL – 2.00 BORE X 12.00 STR – PAINTED 85659-010 HOSE, 4M2T-6FJX-6FJX-33.00 86728-008 FITTING, 90° MB-MJ90-8-6 78 of 87 B20HPC-V26 Rev A...
Page 187 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 OPTIONS ELECTRIC HYDRAULIC OUTRIGGER ID # PART # PART DESCRIPTION QUANTITY 88041-O HYD OUTRIGGER ASSEMBLY, REMOTE 85659-010 HOSE, 4M2T-6FX-6JX-33.00 87540 CABLE SOLENIOD VALVE, WITH DIN PLUG 88026 VALVE, 3SPOOL, 2EA. VDC SPOOL 800083 FITTING, MINI CHECK (PORT) 86750 ADAPTER, MB-FB-8-6 86749...
Page 188 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 OPTIONS ELECTRIC HYDRAULIC OUTRIGGER CONTROLS 3/8-16X1” BOLT 3/8 FLAT WASHER 3/8 LOCKNUT ID # PART # PART DESCRIPTION QUANTITY 801206 ENCLOSURE 6X3X3, FIBERGLASS 88163 DECAL OUTRIGGER UP/DOWN BW10205 SWITCH, 3 POSITION MOM/SPDT SW, SEALING BOOT BW10361 88164-A BRACKET OUTRIGGER 73531...
Page 189 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 OPTIONS AGITATOR GROUP 1 SPOOL CONTROL VALVE ID # PART # PART DESCRIPTION QUANTITY 74584 VALVE, MAUNAL-1 SPOOL 86746 FITTING, 90° MB-MJ-90-8-10 86748 FITTING, 90° MB-MJ90-6-6 86747 FITTING, 90° MB-MJ90LL-6-6 74471-B BOOT, COVER 74471-020 VALVE ACTUATOR FOR 74471, 74585, 74584 VALVES 81 of 87 B20HPC-V26 Rev A...
Page 190 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 OPTIONS 1 SPOOL AGITATOR VALVE DETAIL B DETAIL A DETAIL C ID # PART # PART DESCRIPTION QUANTITY 85706 RELIEF, CARTRIDGE 74469 DETENT KIT, #11 WALVOIL VALVE 74471-020 VALVE ACTUATOR FOR 74471, 74585, 74584 VALVES 82 of 87 B20HPC-V26 Rev A...
Page 191 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 OPTIONS AGITATOR GROUP CONTINUED ID # PART # PART DESCRIPTION QUANTITY 74584 VALVE, MANUAL-1 SPOOL 85657-016 HOSE, 8M2T-10FJX-10FJX45-20.00 85658-011 HOSE, 6M2T-6FJX-6FJX-21.00 85658-010 HOSE, 6M2T-6FJX-6FJX-20.00 FITTING, MB-MJ-10-6 85845 DECAL, OUTRIGGERS 800919 DECAL, WARNING, STAND CLEAR 83 of 87 B20HPC-V26 Rev A...
Page 192 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 AVAILABLE OPTIONS OUTRIGGER GROUP HYD OUTRIGGER OUTRIGGER/AGITATOR ELECTRIC OUTRIGGER AGITATOR GROUP STD/PADDLE OPTION/PADDLE HYD/AGITATOR/SINGLE HYD/AGITATOR/TRIPLE RADIO REMOTE AARCOMM 2-WAY RADIO W/STROKE COUNTER AND VOLUME INDICATOR (IF EQUIPPED) 50’ CABLE REMOTE, 100’CABLE REMOTE AVALAIBLE LIFTING KIT 84 of 87 B20HPC-V26 Rev A...
Page 193 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 CARBIDE WEAR PARTS WEAR RING/CARBIDE WEAR PLATE/CARBIDE ELECTRIC VOLUME/FLOW CONTROL RADIO CONROL OF VOLUME (IF EQUIPPED) WATER PUMP-WASH PUMP ASSY VIBRATOR KIT OLI KIT 85 of 87 B20HPC-V26 Rev A...
Page 194 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 E-STOP PLC KIT HOPPER EXTENSION AUTO LUBE STEEL TUBING 12 PORT PLASTIC TUBING 12 PORT MANUAL LUBE BLOCK TIRE & WHEEL ALUMINUM 9000 LB 86 of 87 B20HPC-V26 Rev A...
Page 195 B20HPC-V26 www.reedpumps.com PARTS (909)287-2100 SURGE BRAKE ASSY 9000LB 2"BALL 3” PINTLE HITCH BALL 2" 2 5/16" REINFORCED HOPPER 87 of 87 B20HPC-V26 Rev A...

REED B20HP Manual

Introduction

General Safety Guidelines

Operation

Main Controls

Power Train Group

Main Hydraulic Pump

Accumulator

Hydraulic Manifolds

Electrical Group

PCL Controls

Frame Installation

Appendix Available Options

Quick Links

Need help?

Questions and answers

Summary of Contents for REED B20HP

REED B20HP Manual

Introduction

General Safety Guidelines

Operation

Main Controls

Power Train Group

Main Hydraulic Pump

Accumulator

Hydraulic Manifolds

Electrical Group

PCL Controls

Frame Installation

Appendix Available Options

Quick Links

Need help?

Questions and answers

Related Manuals for REED B20HP

Summary of Contents for REED B20HP

Table of Contents