Truvox MULTIWASH MW340 Instruction Manual page 6

© Copyright A+D Supplies 2016
Cleaning the Machine
Remove the brushes
by push the retaining
rods in one side and
then pulling them out
the other side.
With a damp cloth
clean the machine
Replace on trolley by
pushing machine up at
an angle and locating
the hooks on the trolley
under the machine,
lower machine down
onto trolley and fasten
Velcro strap.
A+D Supplies, Marsh House, Brunel Road, Newton Abbot, Devon, TQ12 4PB
Replace brushes
and replace the
rods, twisting the
brush helps in lo-
cating the rods.
Make suet that the
rod protrudes
equally each side
Replace the recov-
ery tank.
Rewind the cable.
www.adswsupplies.com
6