Advertisement
Figure 8-23 Latch
Installation Procedure
1.
Issue ()
The AE 905S module must be used with the GPS antenna and GPS surge protector and is connected to
the GPS antenna and GPS surge protector through the GPS feeder.
The GPS antenna receives satellite signals from the GPS. A GPS surge protector can protect a device
against the lightning strikes inducted by the antenna feeder. Without the protection of a surge protector, a
device may be damaged by surge currents or voltage in a lightning weather. The GPS feeder transmits
GPS signals.
The image shown here is indicative only. If there is any inconsistency between the image and the actual
product, the actual product shall govern.
Before inserting an AE 905S module into an interface, lock the latch. Before removing an AE 905S
module from an optical interface, unlock the latch. For details, see Figure 8-23.
For details about how to install the GPS satellite antenna system, see the GPS quick installation guide.
Connect a two-sided female connector to the Protect interface of the surge protector.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8 Optical Module
396
Advertisement
