Huawei NE20E-S Series Hardware Description page 152

Indicator
L/A 0-9
Table 7-98 Service interfaces
Interface
Name
OUT0
IN0-OUT9
IN9
Functional Specifications
Features and
Functions
Basic function
Reliability and
availability
Restrictions and
Remarks
Issue ()
Status Description
Red:
 If the indicator is steady on, the hardware on the PIC is faulty.
Yellow:
 If the indicator is steady on, the PIC is installed in a slot for a
HIC and an alarm is reported or the PIC is not loaded with the
logic.
If the indicator is off, the PIC is powered off or is not registered.
Running status indicator
Green:

If the indicator is steady on, the link is normal.

If the indicator is off, the link is Down.
 If the indicator blinks, data is being transmitted.
Interfac Connec
e Type tor
Type
10GE/GE SFP+/S
FP
Remarks
Support for optical signal input and output of 10 10GE/GE interfaces.
Support for hot swap

Not applicable to outdoor scenarios.

The board does not support the OTN mode or FEC function. If a
colored optical module is used and does not support optical
amplifier insertion, the board supports only point-to-point optical
transmission.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description Cable
10 interfaces LC optical fiber
for 10GE/GE
optical signal
input and
output
7 Boards
150