If the package has suffered rough handling, bumps or damage (visible or concealed), please note it on the bill of lading before accepting the delivery and contact Omcan within 24 hours, so we may initiate a claim with the carrier. A detailed report on the extent of the damage caused to the machine must be filled out within three days, from the delivery date shown in the shipping documents.
Si el paquete ha sufrido un manejo de poco cuidado, golpes o daños (visible o oculto) por favor anote en la factura antes de aceptar la entrega y contacte Omcan dentro de las 24 horas, de modo que podamos iniciar una reclamación con la compañia.
Page 5
12. The use of spare parts other than certified original Omcan parts is prohibited. 13. Do not use the appliance if the power supply cord is damaged. It must be replaced by either a Omcan approved dealer, Omcan or a person with similar qualifications to avoid any danger.
Page 6
- or in the technical specification section of this manual. • If the power supply cable (22) is damaged, it should be replaced by a Omcan approved dealer, Omcan or a person with similar qualifications to avoid any danger. •...
(15 to 30 minutes), before restarting the machine. If the problem persists, switch off the power supply to the machine (unplug the cord from the mains socket (22)) and call in the maintenance service or contact a Omcan approved dealer.
20 seconds for the capacitor of the electronic board to discharge. SPARE PARTS IMPORTANT: The use of spare parts other than certified original Omcan parts is prohibited. This machine requires no specific maintenance because the bearings are lubricated for life. If any intervention...
Page 10
Troubleshooting THE MACHINE STOPS BECAUSE THE MOTOR HAS OVERHEATED (THE CASINGS AROUND THE MOTOR UNITS ARE HOT) • Remove the plug from the power supply socket and follow the instructions in the section on “motor over- heat safety feature”. THE MACHINE STOPS BECAUSE OF A JAM •...
Page 15
Parts Breakdown Model SANTOS 65 45923 Item No. Description Position Item No. Description Position Item No. Description Position AD958 Pusher for 45923 65101 AD999 Locking Spring for 45923 65318 AE040 Spacer M3x20 for 45923 65387 AD959 Feeding Tube for 45923...
Page 16
Parts Breakdown Model SANTOS 65 45923 Item No. Description Position Item No. Description Position Item No. Description Position AE081 Planetary Gearbox for 45923 65531 AE092 Screw H M5x16 ZN Auto for 45923 65548 AE103 Screw H M6x16 for 45923 65604...
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: Merci d’avoir acheté...
Page 20
Since 1951 Omcan has grown to become a leading distributor of equipment and supplies to the North American food service industry. Our success over these many years can be attributed to our commitment to strengthen and develop new and existing relationships with our valued customers and manufacturers.
Need help?
Do you have a question about the Santos 65 and is the answer not in the manual?
Questions and answers