It is mandatory to strictly follow the instructions contained in this manual and any requirements of local law. Safety and Warranty The juice extractor model EX is simple to use and to operate, however read the following precautions to avoid injury or damage to the unit: •...
Safety and Warranty The packaging components are classified as normal solid urban waste and can therefore be disposed of without difficulty. In any case, for suitable recycling, we suggest disposing of the products separately (differentiated waste) according to the current norms. DO NOT DISCARD ANY PACKAGING MATERIALS IN THE ENVIRONMENT! Technical Specifications PICTURE 1...
Installation The juice extractor must be installed on a flat, non-skid work surface with a maximum recommended height of 85 cm. This equipment is equipped with a three pin electric cable. All pins must be connected before the machine is turned on. This ensures the machine is properly grounded. Check if the machine voltage corresponds with the power source.
CUP LID LSP-04 00308.5 MOTOR COMPL.0,25CV 60HZ W 18860.3 LIQUID CHAMBER 00386.7 MOTOR 0,25CV 60HZ 18861.1 SIEVE 00391.3 MOTOR SUPPORT EX 18874.3 00392.1 NUT M4 DIN 1587 19091.8 CHAMBER BASE - ESB 00396.4 CABINET EX/EXB 20080.8 INSULATING TERM. EF-4228 01213.0 CHAVE SELET.COMPL.
Warranty Registration Thank you for purchasing an Omcan product. To register your warranty for this product, complete the information below, tear off the card at the perforation and then send to the address specified below. You can also register online by visiting: www.omcan.com/warrantyregistration.html...
Page 12
Over the last 60 years, Omcan has grown to become a leading supplier to the food service industry in Canada and the USA. Our success over these many years is directly attributed to our established relationships with all of our valued customers and through providing them with Diverse, Dependable and Proven products.
Need help?
Do you have a question about the EX and is the answer not in the manual?
Questions and answers