TCL TAW Series Manual page 7

Slide the "I" section of the window panel into the side bracket of the cabinet. Do this
4.
for both sides.
Insert top and bottom legs of window filler panel frame into channel in the top angle and
5.
bottom rail. Do both sides. Install side retainer to cabinet as shown.
Plastic
Frame
5/16" Long
Hex-Head Screw
Plastic
Step 4: Frame
Placing the Cabinet Inside the Window
Open the window and place the cabinet in the middle of the window sill.
1.
Make sure the bottom rail is seated over the window sill as shown below. Bring the window
2.
5/16" Long
Hex-Head Screw
down temporarily behind the top angle rail to hold the cabinet in place. (It is suggested to
keep a downward angle so accumulated rain water can drain out from the backside of the
unit).
Side
Retainer
Window Filler Panel
Side Retainer
Side
Retainer
Window Filler
Panel
Side
Retainer
Window Filler
Panel
Bottom
Rail Seal
7
NOTE: For safety reasons all 4 screws
must be used to attach the top rail.
Window
Filler Panel
Cabinet
"I" Section
TOP VIEW
Cabinet
"I" Section
TOP VIEW
5/8" Round Head Screw
AC Plastic
Frame
Locking
Screw
Hole
Window
Filler Panel
AC Plastic
Frame
Locking
Screw
Hole
Window
Filler Panel