Advertisement
Blue
Black
Thumb Screws
Fig. 13A
Blue
Black
Thumb Screws
Bulbs
Fig. 13B
Blue
Black
Fan Speed
Switch (pull chain)
Bulb
Fig.14
White
Switch Housing Cover
Light Fixture
Light Fixture Switch
(pull chain)
White
Switch Housing Cover
Light Fixture
Light Fixture Switch
(pull chain)
Glass Shades
White
Switch Housing Cover
Light Fixture
Light Fixture Switch
(pull chain)
Socket
Twist-on Glass
Step 8 Light Fixture Installation
Depending on which model of Avia fan you are in-
stalling, you will either have the 4 light Turtle Clu-
ster (figure 13A-13B) or the Twist-on Light (figure
14) or the Bowl Light (figure 15A-15C). Please fol-
low instruction under the correct light fixture.
Turtle Cluster:
Back off (loosen) the three screws on the switch
housing cover (see figure 13A)
Connect White wire to White wire, and Black wire
to Blue wire using wire nuts. Press together firmly.
Place light fixture onto fan, line up the 2 holes and
rotate light fixture; Insert the screws and tighten.
Each of the above connections
should be made as tight as
possible using the proper size
plastic wire nuts. Plastic elec-
trical tape is not recommended
for these connections.
Place glass shades onto light fixture, Secure with
thumb screws, DO NOT over tighten (see figure
13B).
Twist bulbs into socket, DO NOT over tighten.
Twist Class:
Secure the light kit (switch housing cover) to the
switch housing by installing the three thumb scre-
ws provided in the hardware pack.
Connect White wire to White wire, and Black wire
to Blue wire using wire nuts. Press together firmly.
Install light bulb (Max. 60W B10 bulb * 2pcs)
into socket (see figure 14).
Twist glass onto light fixture DO NOT over tigh-
ten.
.
9
Advertisement
