Advertisement
Blue
Black
Light
Fixture
Bulb
Blue
Black
10
White
Switch Housing Cover
Light Fixture Switch
Socket
(pull chain)
Glass Shade
Fig.15A
White
Switch Housing Cover
Light Fixture
Bulb
Glass
Glass Cap
Finial
Light Fixture switch(pull chain)
Fig.15B
Bowl Class:
Back off (loosen) the three screws on the switch
housing cover.
Connect White wire to White wire, and Black wire
to Blue wire using wire nuts. Press together firmly.
A. Install light bulb (Max. 100W halogen bulb * 1pc)
into socket (see figure 15A).
B. Install light bulb (Max. 60W B10 bulb * 2pcs) into
socket (see figure15B).
C. Install light bulb (Max. 60W B10 bulb * 3pcs) into
socket (see figure15B).
Place bowl glass cover on light kit metal nut (rubber
side on the top), glass cap and finial provided. (see
figure 15B).
Step 9 Final Checks
Check all set screws and connections are properly
in place and tight.
Check blade clearance and rotation.
Attach the decorative pull chain tassel(s) to the light
fixture.
NOTE:
With the speed pull chain located on the light fixture,
set the ceiling fan on its highest speed setting. Once
this speed and light control has been installed, the
speed control on the light fixture must be premanently
left on high speed. Failure to leave the fan speed pull
chain set on high speed will damage the fan and con-
trol and could cause a fire.
ain located on the light fixture should be set in the NO
position and left there also.
You can now control the speeds of your ceiling fan
and the light fixture with the remote control.
The light fixture pull ch-
Advertisement
