Special Waste Disposal; Packaging, Shipping And Complaint; Warranty And Products Return - PROEL WX8A User Manual

29. CHECK THE CONDITION OF THE PROTECTION FUSE, ACCESSIBLE OUTWARD, ONLY WITH THE APPARATUS
SWITCHED OFF AND DISCONNECTED FROM THE MAINS LINE OUTLET.
30. REPLACE THE PROTECTION FUSE ONLY WITH SAME TYPE AS SHOWN ON THE PRODUCT.
31. IF AFTER THE SUBSTITUTION, THE FUSE INTERRUPTS AGAIN THE APPARATUS WORKING, DO NOT TRY AGAIN THEN
CONTACT THE PROEL SERVICE CENTRE.
32. In case of the speakers are provided of rigging points: DO NOT SUSPEND THE SPEAKERS FROM THE HANDLES,
use exclusively these rigging points. Consult professional rigger or structural engineers prior to suspending
loudspeakers from a structure not intended for that use. Always know the working load limit of the structure
supporting the loudspeakers. Always make sure that the rigging hardware minimum rating is at least five times
the actual load, speakers and rigging hardware.
33. In case of suspended installations of active loudspeakers where is not possible to turn on and off the speakers
from their appropriate switches, we recommend to install switches on the mains lines, for this purpose consult
an expert electrician for the exact dimension of wiring.
34. Locate the speakers as far away as possible from radio or television receivers or other sensitive equipment. These
speakers have a strong magnetic field which can induce hum and noise into unshielded devices that are located
nearby with consequent deterioration of reception of image and sound.

SPECIAL WASTE DISPOSAL

This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes
at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer where they purchased this product, or their local
government office, for details of where and how they can take this item for environmentally safe recycling. Business users
should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with
other commercial wastes for disposal.

PACKAGING, SHIPPING AND COMPLAINT

• This unit package has been submitted to ISTA 1A integrity tests.
• We suggest you control the unit conditions immediately after unpacking it. If any damage is found, immediately advise the dealer.
Keep all unit packaging parts to allow inspection.
• Proel is not responsible for any damage that occurs during shipment.
• Products are sold "delivered ex warehouse" and shipment is at charge and risk of the buyer.
• Possible damages to unit should be immediately notified to forwarder. Each complaint for package tampered with should be done
within eight days from product receipt.

WARRANTY AND PRODUCTS RETURN

• Proel S.p.A. products have operating warranty and comply their specifications, as stated by manufacturer.
• Proel S.p.A. warrants all materials, workmanship and proper operation of this product for a period of two years from the original
date of purchase. If any defects are found in the materials or workmanship or if the product fails to function properly during the
applicable warranty period, the owner should inform about these defects the dealer or the distributor, providing receipt or invoice
of date of purchase and defect detailed description. This warranty does not extend to damage resulting from improper installation,
misuse, neglect or abuse. Proel S.p.A. will verify damage on returned units, and when the unit has been properly used and warranty
is still valid, then the unit will be replaced or repaired. Proel S.p.A. is not responsible for any "direct damage" or "indirect damage"
caused by product defectiveness.
• Proel S.p.A. declines any liability for damages to objects or persons caused by lacks of maintenance, improper use, modifications,
installation not performed with safety precautions and at the state of the art.
• The information contained in this publication has been carefully prepared and checked. However no responsibility will be taken
for any errors. All rights are reserved and this document cannot be copied, photocopied or reproduced in part or completely
without written consent being obtained in advance from PROEL. PROEL reserves the right to make any aesthetic, functional or
design modification to any of its products without any prior notice. PROEL assumes no responsibility for the use or application of
the products or circuits described herein.
3