Technical Data Analyser - GERATHERM Diffustik User Manual

5.

Technical Data analyser

Modifications are not permitted with this device
Technical Data:
Electrical Data:
CO Analyser:
CH4 Analyser:
Operating conditions:
Storage and Transport
conditions:
Minimal requirements PC
system:
DIFFUSTIK_MAN_ENG_V1.2.2_REV01.DOCX
Dimensions:
Weight:
IP protection type:
Protection class:
classification according to
MDD:
Application component type :
PC interface:
Power supply:
Power consumption
Measurement principle:
Measurement range:
Accuracy:
Resolution:
Measurement principle:
Measurement range:
Accuracy:
Resolution:
Temperature:
Air humidity:
Temperature:
Humidity:
Explosive conditions:
Norm:
Processor:
RAM Memory:
Hard disk:
Monitor:
Interface:
Operating system:
User Manual
245 mm x 355mm x 145mm (L x w x h)
5650 g
IPX0 IEC 529
II
IIa 93/42 EWG date 14th June, 1993 Appendix IX
BF according to VDE 0750 (DIN EN60601-1)
Geratherm Respiratory spezifisches Bus System
230V AC
ca. 25VA
Infra-red Absorption
0 – 3000 ppm
< 1%
24 Bit
Infrarot absorption
0 – 3000 ppm
< 1%
24 bit
+15°C to +35°C
10 to 90 % (non-condensing)
-10°C to +60°C
0 to 95% (non-condensing)
Device should not be used in explosive atmospheres
DIN EN 60950
Pentium III compatible or higher
1Ghz or higher recommended, 500 MHz minimum
512 MB RAM or higher
192 MB RAM minimum
1.5 GB or greater recommended
600 MB free space required
XGA (1024 x 768) or higher
USB 2.0 recommended, USB 1.1 minimum
Windows XP SP2 or higher
Diffustik
Page 24