Spare Parts - Nederman MagnaTrack Instruction Manual

EN Fan Start/Stop Device Program Kit D2-3
8.
Change the default value '1002' to another value and click 'OK', see Figure 8.
9.
Click 'Write...' and then 'OK', see Figure 9.
10.
To reprogram additional transmitters, return to step 1.
11.
When all transmitters are programmed, select 'File > Exit' to close the program.
12.
Disconnect the Programming device from the transmitter, put back the PCB or batteries, and
put back and secure the cover on the back of the transmitter, see Figures 3 and 4.
5 recycling
The product has been designed for component materials to be recycled. Its different material types
must be handled according to relevant local regulations. Contact the distributor or Nederman if
uncertainties arise when scrapping the product at the end of its service life.
6

Spare parts

Contact your nearest authorized distributor or Nederman for advice on technical service or if you
require help with spare parts. See also www.nederman.com.
When ordering spare parts always state the following:
•
Part number and control number (see the product identification nameplate).
•
Detail number and name of the spare part (see www.nederman.com).
•
Quantity of the parts required.
10