Operating Modes - Timberk AC TIM 18LC CF5 Instruction Manual

7. OPERATING MODES

AUTO mode
The auto mode on and off is turned on and off with the use of the button
"MODE" on the remote control board.
1. While working in the AUTO mode, a microprocessor will automatically
select COOL, FAN, HEAT or DRY modes based on the difference between
actual and preset air temperature indoors.
2. If the AUTO mode does not provide comfort conditions, select the mode
manually.
COOL, HEAT and FAN
1. Turn the conditioner on pressing the «ON/OFF» button.
2. Pressing the «MODE» button, select COOL, HEAT or FAN mode
manually.
3. Pressing the «TEMP» button (up-down), set the desired air temperature
indoors (except for FAN mode).
4. Pressing the «FAN SPEED» button on the remote control board, select
the fan rotation speed: AUTO, LOW, MIDDLE, HIGH, and the conditioner
will start working in accordance with the selected setting.
5. To turn the conditioner off, press the «ON/OFF» button once again.
In the FAN mode air temperature indoors is not set
DRY
Turn the conditioner on pressing the «ON/OFF» button. Pressing the
«MODE» button, select the DRY mode. The conditioner will start working
in the set mode. To turn the conditioner off, press the «ON/OFF» button
once again.
«TURBO» mode
When pressing the «TURBO» button on the remote control board, the
conditioner will start working in turbo mode for maximum cooling (in cool
mode) or for maximum heating (in heat mode).
TIMER mode
Procedure of timing:
If the conditioner is off, then press the "TIMER" button to activate the
8
www.timberk.com • Electric air conditioner
automatic turning on. Pressing this button once again, set the time for
turning the conditioner on in the set time interval. To cancel the timer mode,
press the "TIMER" button once again.
If the conditioner is working, then press the "TIMER" button to activate
the automatic turning off. Pressing this button once again, set the time for
turning the conditioner off in the set time interval. To cancel the timer mode,
press the "TIMER" button once again.
«SLEEP» mode
Using this button, you may turn the sleep mode on and off. In this mode the
fan rotation speed will be low.
When the function «SLEEP», if the air conditioner operates in cooling mode,
set temperature will increase1°C in 2 hours and 2°C over 7 hours.When the
function «SLEEP», if the air conditioner operates in heating mode, the set
temperature will decrease2°C in 1 hour and another 2°C within 2 hours of
work. After 8 hours in SLEEP mode air conditioner turns off.
Regulation of treated air flow direction
Regulating the position of deflectors (blinds), set the direction of treated
air flow ensuring uniform distribution of temperature and the most comfort
conditions in the room. To change the position of deflectors, use the
«SWING» buttons.