Safety And Accident Prevention Regulations - Glamox FL60A Operating Instructions Manual

Safety and accident prevention regulations

de
en
fr
tr
el
es
pt
da
nl
no
sv
pl
cs
hu
Seite 8 von 26
Besides the safety and accident prevention regulations of the professional
associations, the following notes must be observed in order to prevent personal
injury and material damage:

This product may only be operated for its intended purpose, as otherwise
hazardous situations can arise with injuries or death as consequences (see
section "Intended use").

The operator is responsible for compliance with the intended use, in particu-
lar for ensuring that only authorized personnel work on this product.

The national, local and system-specific provisions and requirements must be
observed.

An inadequately lit work area can result in various risks. The operator must
ensure adequate lighting in order to avoid these risks.

This product may only be operated with properly mounted safety and protec-
tion devices. These devices may only be disassembled for maintenance and
repair work. After completion of this work, the safety and protection devices
must be installed again immediately. Otherwise there is a risk of injury

Maintenance and repair work may only be carried out by authorized technical
personnel after disconnection from the power supply.

The implementation of specified maintenance and repair work is an integral
aspect of this product's proper use, in particular compliance with the mainte-
nance intervals. If you do not carry out this work, fault-free functioning cannot
be ensured and hazards can arise for persons and material assets. We
recommend that you keep maintenance records.

Before maintenance and repair work, including cleaning work, the power
supply must be switched off and, if necessary, disconnected from the power
supply (disconnect network connection). It must also be ensured that no oth-
er person or persons can restore the power supply. Otherwise there is a risk
of injury.

Pay attention to the safety labels and the data on the rating plate located on
this product. These may not be removed. If they become unrecognisable or
lost, please contact Customer Service. Illegible or missing safety labels or
rating plates will render the product approval invalid.
02.12.2014 7179763200 / Index 00 / DCN 21433