Using The Trimmer; Cleaning And Maintenance - Vitek VT-2555 Manual Instruction

oper
hani-
, for
ttery
sing
etc.
om-
unit
use-
dren.
any
ttery
y to
ntact
and
the
ch of
USE
AGE
CES
low
rs at
urn-
with
mer.
T-2555_50x120.indd 5
–
Install the battery compartment lid (5) back to its
place and turn it clockwise until bumping (pic.3).

USING THE TRIMMER

–
The attachment (2) is used for cutting hair in
the nose or ears.
–
Remove the cap (1).
–
Switch the trimmer on using the power
switch (3).
Cutting hair in the nose
–
Make sure that the nasal cavities are clean.
–
Carefully insert the attachment (2) into the
nostril.
–
Do not insert the attachment (2) into the nostril
deeper than 0.5 cm.
–
Make circular movements with the trimmer to
remove undesirable hair in the nostrils.
Cutting hair in the ears
–
Make sure that the external ear canals are
clean and there is no cerumen in them.
–
Carefully insert the attachment (2) into the
external ear canal.
–
To avoid injuries of the eardrum, do not insert
the attachment (2) into the ear canal deeper
than 0.5 cm.
–
Make circular movements with the trimmer to
remove undesirable hair in the auricle.
–
After you finish using the unit, switch the unit off
by setting the switch (3) to the lower position.
–
Put the protection cap (1) on the attachment (2).

CLEANING AND MAINTENANCE

–
Remove the batteries from the battery com-
partment.
–
Wipe the outer surface of the unit body with a
soft, slightly damp cloth, then wipe it dry, provide
that water does not get into the unit body (4).
–
Do not use abrasives and solvents.
–
Use the brush (6) to clean the attachment (2).
–
For better cleaning periodically remove the
attachment (2) and rub it with alcohol.
ENGLISH
5
16.01.2019 9:53:13