General Settings - Conrad Electronic GX106 Operating Instructions Manual

IMPORTANT!
In case of a wrong PIN code, the SIM card is blocked after the third
attempt! Then the card can only be unblocked in a mobile phone with
the super PIN.
Now re-connect the operating voltage. Then the GSM LED starts blink-
ing afterwards approx. every 3 seconds and the module tries to dial into
the GSM network.
With the software „Control module", you can display the status of the
module's inputs and outputs in the menu point „Communication" and
also reprogram them in running operation.

General settings

When you click onto the button General settings, an interface appears
for entering the SIM card's PIN number, the desired phone numbers
(PHONE), fax numbers (FAX) and e-mail addresses (MAIL).
SIM
Here you have to enter the four-digit PIN of the inserted SIM card. The
PIN query on the card must be activated (meaning when you insert the
card in a mobile phone and turn it on, the PIN query must appear!).
You can assign a password with which everyone sending the password
can switch: this lets you switch the 4 SMS outputs and the DAC output
from any mobile phone and request an SMS response. The password
must consist of 8 characters. If you enter a shorter password, you must
attach the corresponding blanks with the SMS (see example on chapter
4 „SMS outputs").
36